PoE Injectors and Splitters
With the ALLNET Power over Ethernet injectors, you can install your PoE-capable IP end devices such as WLAN access points, VoIP telephones and many more absolutely independently of existing power sockets. This allows you, for example, to select the most ideal installation locations in a building for WLAN access points in terms of radio technology, without having to pay attention to the power cabling. Non-PoE-capable switches can be cheaply "retrofitted" with Power over Ethernet, especially if you only need a few ports with PoE supply.
In reverse you can use the ALLNET PoE splitters. A splitter is basically the exact opposite of an injector. Simply plugging your ethernet cable with PoE into the splitter leaves you with an ethernet port and a power outlet of max 90 watts (depending on what power input is used), ranged from 10V up to 25V.
The ALL0489v4 2.5GBASE-T PoE+ Injector provides up to 30 watts of power and a 2.5 Gigabit data connection anywhere in the network infrastructure. This device feeds DC power over a CAT5e UTP cable, increasing flexibility in positioning a PoE-enabled device when a nearby power source is lacking. It supports PoE+ standard (802.3af 15.4W & 802.3 at 30W) and up to 30W power for connected PD devices. It can easily connect to powerful devices such as VoIP phones, APs and IP cameras.
The device is plug-and-play without software configuration. It supports 0?~45? Operating temperature and metal housing design, which is more suitable for various environmental applications. Provides a PoE LED status signal, which gives an easily detectable PoE connection status. Over-current and short-circuit protection are also supported to ensure safety.
KEY FEATURES
10/100/1000/2500 Base-T (Data) for connection to Ethernet switch 10/100/1000/2500 Base-T PoE (Power/Data) for connection to the PoE device (PD) Auto-Negotiation Automatically detects if the connected device is PoE capable to avoid sending power to a non-PoE device. Complies with IEEE802.3, 802.3u, 802.3ab, 802.3bz, 802.3af, 802.3at standards. 802.3af (15.4W) and 802.3at (30W) PoE power output. one PoE Link LED one GND screw full range (100~240VAC) internal power supply No fan, passive cooling, small size, silent design MTBF: over 50,000 hours@45? ESD IEC61000-4-2 contact +/-4KV, air +/-8KV EFT IEC61000-4-4 power 2KV, LAN 1KV Overload protection IEC61000 4-5 cable to cable & cable to GND Level3 2KV PRODUCT SPECIFICATIONS
Standard IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3bz, IEEE802.3af, IEEE802.3at Standards Interface: 1 * PoE+ 10/100/1000/2500Mbps RJ-45 port, 1 * 10/100/1000/2500Mbps RJ-45 port LED indicators: power supply (green), PoE link (green) Emission: FCC, CE, VCCI Class B Safety: CE LVD Operating temperature & humidity: 00- 450C; 10%~90% RH. Storage temperature & humidity: 20°- 70°C; 5%~90% RH. Dimension: 130 x 62 x 36 mm Switching power supply: +54V/40W, 100~240VAC input, 47~63Hz. Overload protection
Back |