Tel.: +49 (0)89 / 89422222
Please choose your country:
Choose a language
We are a developer and manufacturer of advanced networking and communications technology. Our innovative networking, storage, security and home automation products are designed in our own laboratories and distributed in many European countries.


Power over Ethernet (PoE) is a technology to distribute power and data over a single network cable. To use PoE, you need devices offering the functionality. The most common PoE products are:

- Switches
- Splitters
- Repeaters
- Injectors
- Cameras
- Access Points
- LED lamps

Now let’s have a closer look at the products.

PoE splitter


A PoE Splitter has a PoE input and an output for power and data. The device splits the PoE signal back to data and power. There are also special splitters, with adjustable output voltage selector.

PoE repeater


The PoE repeater extends the PoE signal. The maximum cable length for this PoE technology is 100 meters, and then the signal must be repeated: This is done by the repeater. With repeaters the total length can be enhanced to a maximum of 700 meters.

PoE injector


A PoE injector does the opposite of a splitter. It is equipped with a power and data input and a PoE output. An injector is much cheaper than a switch, which makes it perfect for smaller network infrastructure.

A PoE camera is an IP camera that can be powered by PoE. This is very helpful, when the surveillance camera is placed in an area with no power outlets.


Access Points, which are supplied by PoE, get data and power directly via a standard patch cable. 

Nearly all modern IP phones are PoE capable. With PoE the amount of cables can be reduced dramatically. 

LED devices with a network cable can also be powered by PoE.


Power over Ethernet (PoE) is a technology to distribute power and data over a single network cable. PoE helps to reduce the installation and operating costs, because no power supply is needed at the installation point.

The ALLNET LT PoE products support the IEEE802.3af standard with an output of 15.4 watts, the IEEE802.3at high power standard with 30 watts as well as the LT PoE standard with 90 Watts. Active PoE devices are detected automatically and supplied individually on their own power requirement. By combining Switch/Injector, Repeater and Splitter distances of more than 500m are possible. At the end of the route devices with no native PoE function can be powered with 25V. With standard CAT6 cables up to 90 watts can be transported via PoE.

Our LT PoE products: