Tel.: +49 (0)89 / 89422222
Please choose your country:
Choose a language
We are a developer and manufacturer of advanced networking and communications technology. Our innovative networking, storage, security and home automation products are designed in our own laboratories and distributed in many European countries.

PoE Injectors and Splitters

With the ALLNET  Power over Ethernet injectors, you can install your PoE-capable IP end devices such as WLAN access points, VoIP telephones and many more absolutely independently of existing power sockets. This allows you, for example, to select the most ideal installation locations in a building for WLAN access points in terms of radio technology, without having to pay attention to the power cabling. Non-PoE-capable switches can be cheaply "retrofitted" with Power over Ethernet, especially if you only need a few ports with PoE supply.

In reverse you can use the ALLNET PoE splitters. A splitter is basically the exact opposite of an injector. Simply plugging your ethernet cable with PoE into the splitter leaves you with an ethernet port and a power outlet of max 90 watts (depending on what power input is used), ranged from 10V up to 25V.

pdf-download 99300-1  Art. nr. 99300

> Zum Online Shop


  • IEEE802.3af/at Standard
  • LT PoE++ up to 90W
  • bis zu 90W power output
  • DC Output 10-25V
  • 2x USB ports 5V/2A


Power over Ethernet, even if it does not support your device.

The Power Over Ethernet Splitter allows your network devices such as access points, wireless cameras or switches / hubs that are not PoE capable, to provide over the CAT6 cable as the power supply wherever you need your Network devices.

The ALL048700 splits before the device from the network cable in electricity and the data back on to two lines. Here, a voltage of 10V-25V (in 1V steps) is output via a rotary switch back, so this splitter can be used universally. The splitter is compatible with IEEE802.3af/at / LT PoE++ and provides even, depending on the input power up to an output power of 90 watts. In addition, two USB ports can be loaded such as Smartphones and tablets.

Technical Details:



supported standards:

LT PoE++
IEEE802.3af Power over Ethernet
IEEE802.3at Power over Ethernet enhancements
IEEE802.3 10BaseT
IEEE802.3u 100BaseTX
IEEE 802.3ab 1000BaseT


1x RJ45 Input (Data and Power)
1x RJ45 Output (only Data)
1x Output (only Power) Phönix contacts
2x USB 2.0 5V Outputs per max. 2A


Power / PoE Act/Status

Voltage Input PoE:


Voltage Output:


Power Consumption:

System: 2,1A (Max.120W), StandBy: typ. 1,8W


Metal case


Length/Width/Height: 200 x 80 x 36 mm


440g (only device)


Temperature Operating: 0 ~ 50 °C
Humidity: 10% ~ 90% (non condensing)



Product Video



 Article NoProductname
Synergy 21 LED zub Schraubklemme KEPA (Phoenix® kompatible) Stecker 2 F