ALLNET Switch full managed 24 Port Gigabit 370W / 24x PoE+ / 4x SFP+ 10G / 19" / "ALL-SG8628PM-10G"
Highlights:- 24 port Gigabit Layer2+ switch architecture (ports 1~24).
- 4 ports SFP+ 10G slots for optional GBICSs compatible (ports 25~28)
- Supports various PoE management functions, including PoE shedule, PoE PD alive, etc.
- Supports SFP DDM & cable diagnostics
- Supports G.8032 ERPS, self-detection time < 20 ms
- Supports 1588 V2.0, transparent clock
- Supports port aggregation
- 4KV surge protection, 6KV contact/8KV air ESD protection
- Max. 370W PoE budget
- 19" angle or wall/table mounting possible
ALL-SG8628PM-10G is a L2+ managed switch with 24 gigabit Ethernet ports and 4 1G/10G dual speed SFP ports. The 24 Ethernet ports supports IEEE802.3.af/at PoE output, can work with PoE PD devices like IP cameras, wireless AP, doorbell etc. With Rich L2+ management function, it is easy to set up to meet the projects technical requirements. It is an ideal solution for CCTV surveillance, wireless coverage and other SMB applications.
Rich PoE Management function - PoE PD-alive check
- Scheduled power rebooting
- PoE schedule
- PoE usage monitoring
- Soft-reboot PoE Non-stop
- PoE port power feeding priority
10Gbps Uplink Capacity for Big Bandwidth Application
10G Ethernet is a big leap in the evolution of Ethernet. The 10G SFP+ slots supports dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. It is a cost-effective solution for SMB network to achieve the maximum performance of the 10G networks
Solution for IPv6 Networking
With the IPv6/IPv4 dual stack and other management functions, the ALL-SG8628PM-10G is the best choice for IP CCTV surveillance, VoIP and wireless solution providers to develop the IPv6 network. Meanwhile they help the SMBs to upgrade their network infrastructures to the IPv6 era without any extra investment.
Robust Layer 2 Features
The ALL-SG8628PM-10G can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS, IGMP/MLD snooping etc. The ALL-SG8628PM-10G allows the operation of a high-speed trunk combining multiple ports.
Powerful Security Functions
The ALL-SG8628PM-10G provides a comprehensive access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises?802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.
Enhanced Security and Traffic Control
The ALL-SG8628PM-10Gsupports DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.
User-friendly Secure Management
For efficient management, ALL-SG8628PM-10G managed switch series is equipped with console, web and SNMP management interfaces. With management interface, ALL-SG8628PM-10G offers an easy-to-use, platform independent management and configuration facility. The ALL-SG8628PM-10G supports SNMP and it can be managed via any management software based on the standard SNMP v1 or v2 Protocol. Meanwhile the ALL-SG8628PM-10G offers Cisco-like command via Telnet or console port and customer doesn?t need to learn new command from these switches. Moreover, the ALL-SG8628PM-10G offers the remotely secure management by supporting SSH,SSL and SNMP v3 connection where the packet content can be encrypted at each session.
Intelligent SFP DDM Function
The ALL-SG8628PM-10G support SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Smart PoE PD-Alive Check
ALL-SG8628PM-10G managed PoE switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8628PM-10G will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD?s power source and reducing administrator management burden.
PoE Schedule Function for Energy Saving
For environmental protection purpose, the ALL-SG8628PM-10G switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
Scheduled PD Re-starting
The ALL-SG8628PM-10G smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.
1588 Time Protocol for Industrial Computing Networks
The ALL-SG8628PM-10G is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
Technische Daten:
Model
|
ALL-SG8626-10PM
|
Copper Ports
|
24-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
|
Fiber Ports
|
4-10G SFP interfaces
|
PoE Ports
|
1~24-802.3af/802.3at PoE Injector Ports
|
Console Ports
|
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
|
Switch Architecture
|
Store-and-Forward
|
Switch Fabric
|
128Gbps/non-blocking
|
Throughput
|
94.23Mpps @64 bytes
|
Address Table
|
32K entries
|
Share Data Buffer
|
32Mb
|
Jumbo Frame
|
9600 Bytes
|
SDRAM
|
2Gb
|
Flash Memory
|
128Mb
|
Flow Control
|
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|
Reset Button
|
>2 sec.: Factory default and reset
|
Power Supply
|
100~240V AC, 50/60Hz, 4A (max.)
|
Power Consumption
|
Max. 370 watts
|
PoE Standards
|
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
|
PoE Power Supply Type
|
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
|
LED Indicators
|
Power: Green
Solid on- power work normal, off- power disconnected
System: Green
Blink-work normally, solid on- soft work abnormal, fast Blink - soft upgra
de
PoE: Yellow
Solid on- PoE work normally, Off- PoE doesn?t work, Blink - PoE overload
10/100/1000T RJ45 Interfaces (Port 1 to Port 48): 1000 LNK/ACT (Green)
Blink - port connected with data transmission; Solid on- port connected
without data transmission
1G/10G SFP Interfaces (Port 25 to Port 28): Blue
Blink - port connected with data transmission; Solid on- port connected
without data transmission
|
EMC
|
Surge Immunity:
4KV Per: IEC61000-4-5
ESD Protection:
ESD Level 4 Per: IEC61000-4-2
EFT Level 4 Per: IEC61000-4-4
|
Layer2 Functions |
Port configuration
|
Auto-negotiation
Flow Control
Port Mirror: TX/RX/BOTH; Many-to-1 monitor
CPU Mirror
Traffic statistics
|
Link Aggregation
|
Static link aggregation
LACP (Dynamic Trunk/Static Trunk)
Algorith based on Source/Destination MAC
Algorithm based on Source/Destination IP
|
MAC Table
|
Aging Time
Static MAC address
Dynamic MAC address management
|
VLAN
|
4094 Active VLANs
4094 VID
802.1Q Tag VLAN
Port VLAN
Protocol VLAN
MAC VLAN
Voice VLAN
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
GARP/GVRP
|
ACL
|
512ACLs
L2, L3 e L4
Time-based ACL
IP ACL
MAC ACL
MAC-IP ACL
User-Defined ACL
ICMPv6
|
Spanning tree
|
802.1D Spanning Tree Protocol (STP)
802.1w Rapid Spanning Tree Protocol (RSTP)
802.1s Multiple Spanning Tree Protocol (MSTP)
Loop Guard
Root Guard
TC-BPDU Guard
BPDU Guard
BPDU Filter
|
Ring Protection |
<20ms G.8032 ERPS Ring
Fast Ring
|
Multicast |
1024 groups
IGMP v1/v2/v3 Snooping, Fast Leave
MLD Snooping
Multicast VLAN
IGMP filter
MVR
Multicast Routing
|
QOS
|
8 mapping IDs to 8 level priority queues
CoS port-based
CoS 802.1p-based
CoS DSCP-based
Scheduling algorithms SP, WRR, SP+WRR
Storm Control (Broadcast, Multicast, Unknown Unicast)
Bandwidth control per port
SWRR, DWRR for Scheduling
Flow Redirect
Precedence
TOS
Rate Limiting(Ingress/Egress)
Stri Priority
|
Security Features
|
Port Security
MAC address filter
ARP Association (Manual, ARP scanning, DHCP snooping)
ARP Protection
AAA
DAI
DoS (Denial of Service)
Classification of packages based on: End.MAC, IP End, TCP / UDP Ports,
Protocol Type;
802.1x Authentication (port-based e MAC-based)
TACACS/TACACS+ Authentication
RADIUS Authentication
DHCP Filter
Guest VLAN
SSLv2/SSLv3/TLSv1
SSHv1/SSHv2
Restriction of WEB access based on: IP Address, And. MAC and Port;
Port Isolation
Loopback detection
|
Management
|
SNMP v1/v2c/v3 with Full Private MIBs
RMON 4 groups
WEB (HTTP/HTTPS)
CLI (Telnet, Console, SSHv1/v2)
Firmware upgrade via console/web/TFTP
Configuration Backup/Reload
Dual Firmware
LLDP
Configuration Export/Import
CDP Aware
OAM (IEEE802.3ah)
CFM (IEEE802.1ag)
sFlow
Telnet
|
Synchronization, IEEE1588
|
Support IEEE1588v2 transparent clock
|
Other Features
|
DNS Client
DHCP Relay
DHCP Client
DHCP Snooping
DHCP Option 66
DHCP Option 67
DHCP Option 82
NTP/SNTP Client
UPNP
UDLD
|
PoE management
|
Total PoE power budget control
Per port PoE function enable/disable
PoE admin-mode control
PoE port power feeding priority
Per PoE port power limitation
PD classification detection
PD alive check
PoE schedule
Soft-reboot PoE Non-stop |
Maintenance
|
Cable Diagnostics
Ping
SFP DDM (Digital Diagnostics Monitoring)
Thermal protection
System log (Local and Remote)
Memory and CPU Monitoring
Tracert/ tracert 6
|
Layer 3 functions |
Static Routing
|
IPv4 Unicast: Static Routing(Software Base)
IPv6 Unicast: Static Routing(Software Base)
|
IPV6
|
IPv6 neighbor discovery (ND)
Path maximum transmission unit (MTU) discovery
Internet Control Message Protocol (ICMP) version 6
TCPv6/UDPv6
Ping6
Telnet(v6)
Http/Https
Interface IPV6
ACL IPV6 |
Dimension
|
440x290x44.5 mm
|
Weight
|
4.5 kg
|
Working Temperature
|
-10 °C to 45 °C
|
Storage Temperature
|
-20 °C to 70 °C
|
MTBF
|
50,000hrs
|
|
| | ALLNET Switch Modul ALL4750 Mini-GBIC Modul,1000Mbit,SX/LC, | | | ALLNET Switch Modul ALL4753 Mini-GBIC Modul,1000Mbit, EX/LC, 40KM | | | ALLNET Switch Modul ALL4755 Mini-GBIC Modul,1000Mbit, ZX/LC, 70-80KM | | | ALLNET Switch Modul ALL4751 Mini-GBIC Modul,1000Mbit,LX/LC, 10Km | | | Patchkabel RJ45 FTP(F/UTP) 0.25m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 0.5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 1.0m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 2m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 3m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 7.5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 10m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45, 0.25m grau, CAT5e, S-FTP(SF/UTP), Synergy | | | Patchkabel RJ45, 0.5m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 1.0m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 2m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 3m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 5m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 7.5m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 10m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 15m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 0.25m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 0.5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 1.0m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 2m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 3m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 7.5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz,10m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz,15m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | ALLNET ALL4757 / Switch Modul SFP+(Mini-GBIC), 10Gbit, SR/LC, | | | ALLNET Switch Modul ALL4758 SFP+(Mini-GBIC), 10Gbit Singlemode, LR/LC, bis 20Km | | | ALLNET Switch Modul ALL4752 SFP(Mini-GBIC), 1000Mbit, LHX/LC, 20KM, | | | ALLNET Switch Modul ALL4763 SFP+(Mini-GBIC), 10Gbit, B(Bidi)A/LC, Tx1270nm/Rx1330nm, 9u, 20Km, | | | ALLNET Switch Modul ALL4764 SFP+(Mini-GBIC), 10Gbit, B(Bidi)B/LC, Tx1330nm/Rx1270nm, 9u, 20Km, | | | ALLNET Switch Modul ALL4756 SFP(Mini-GBIC), 1000Mbit, EZX/LC,120KM | | | ALLNET Switch Modul ALL4767 SFP+(Mini-GBIC), 10Gbit, RJ45(TP), uncodiert | | | TP(RJ45) POE-Tester, at/af, Endspan/Midspan, standard, Synergy 21, | | | ALLNET Switch Zubehör smart managed 24 Port Gigabit PoE AT Ersatzlüfter ALL-SG8428PM | | | ALLNET Switch Modul ALL4757-INDU SFP+(Mini-GBIC), 10Gbit Multimode, SR/LC, Industrial -40/+85 Grad, | | | ALLNET Switch Modul ALL4758-INDU SFP+(Mini-GBIC), 10Gbit Singlemode, LR/LC, Industrial -40 -+85Grad, DDM, bis 20Km | | | ALLNET Switch Modul ALL4768 SFP+(Mini-GBIC), 10Gbit Singlemode, ER/LC, bis 40Km | | | ALLNET Switch Modul ALL4769 SFP+(Mini-GBIC), 10Gbit Singlemode, ZR/LC, bis 80Km | | | ALLNET Switch Modul ALL4767-INDU SFP+(Mini-GBIC), 10Gbit, RJ45(TP), uncodiert, Industrial -40/+85 Grad, |
Back |