Highlights:
- 60 Watt PoE IP67 Outdoor Injector according to IEEE802.3bt Standard
- IP67 weatherproof & IK10 shockproof for robust outdoor installations
- 1x 10/100/1000M TX PoE output according to IEEE802.3af/at/bt 60W
- 1x AC 100~240V input voltage on 2PIN terminal (AC connection cable must be installed by customer, thus flexible in installation)
- Extended operating temperature: -20°C to +60°C
This product is a waterproof Gigabit Power over Ethernet (PoE) device for powering most common IP end devices. The injector is fully compliant with the IEEE 802.3af/at/bt standard. The device also complies with the IP67 protection class, which means it is weatherproof and can be used outdoors without any problems. Thanks to the IK10 standard, the injector is vibration-resistant, which ensures reliable and safe use, even in industrial environments. It transmits the required electrical energy and implements the data exchange via an RJ45 cable with a maximum transmission distance of 100 metres. The injector automatically detects which PoE standard is present at the end device on the output side and regulates the voltage automatically. The injector can supply a PoE end device at the output with a maximum power of 60W according to the IEEE802.3BT standard.
Technical Details:
Technical Details:
Model: |
ALL-PI2013OBT60 - 60W waterproof PoE injector AC to BT 60W |
IEEE Standard:
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE802.3af for POE
IEEE802.3at for POE+
IEEE802.3bt
|
Network Media (Cable):
|
10BASE-T: UTP category 3,4,5 cable (?100m)
100BASE-TX: UTP category 5 cable (?100m)
1000BASE-T: UTP category 5e cable (?100m) |
Network Connector:
|
1xRJ-45 10/100/1000BaseT(X) Data
1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power IEEE802.3bt 60W |
Input current:
|
1,5A Max
|
Power input:
|
AC 100-240V 50/60Hz 2 PIN Terminal |
PoE Power output:
|
60W Max. IEEE802.3bt |
POE Pin Assignment RJ45:
|
1/2(-), 3/6(+) and 4/5(+),7/8(-)
|
Output Voltage:
|
DC 55V±5% |
Output ripple voltage:
|
?200mV,Test conditions: rated input voltage, full load output, Tested with 20MHz bandwidth oscilloscope, Parallel connected a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to the output |
Output current:
|
1.1A Max. |
LED Indicator:
|
PWR(Green) , PoE(Bt:Green,UPoE:orange) |
Dimmension:
|
150 x 73 x 44mm
|
Operating Temperature:
|
-20°C ~ 60°C
|
Storage Temperature:
|
-40°C ~ 80°C |
Surge Protection:
|
Difference Mode:±4KV, Common mode:±6KV |
MTBF:
|
<50000 hours |
Electrostatic standard:
|
Contact 6KV, air 8KV
|
Waterproof grade:
|
IP67 |
Anti-hazard classification:
|
IK10 |
Back 
