Industrial switches for DIN rail
The difference between industrial and normal switches is defined by the possibility of installation, they are normally assembled onto a DIN rail. Furthermore industrial switches have extended temperature ranges and redundant power inputs. This means that you can supply your switch not only by a power supply but e.g. also via phoenix terminal. Moreover they are designed smaller: If there´s not a lot of space available – e.g. in a street lamp – you can still install the industrial switch.
Entry Line unmanaged Switches
Entry Line smart managed switches
Differences between Professional Line and Entry Line
The Professional Line offers the following exclusive options:
- Partial certification according to EN60068-2-6 Vibration
- Partial certification to EN60068-2-27 Shock
- Partial certification according to EN60068-2-32 Free Case,
- Partial certification according to EN 50155/EN50121-3 Railroad, EN50155/EN50121-4 Railroad
- Partial alarm relays which are activated when a power supply fails
- Partial ERPSv2 Ethernet Ring Protection Switching
Professional Line
Fanless 4-port Gigabit full managed industrial PoE Layer 2+ Ethernet switch compliant with IEEE802.3at
|
Model |
ALL-SGI8104v2PM |
Copper Ports |
4-10/100/1000BASE-T RJ45 auto-sensing ports |
Fiber Ports |
2-100/1000BASE-T SFP interfaces, supports 100/1000Mbps dual mode |
PoE Ports |
4-802.3af/802.3at PoE Injector Ports |
Console Ports |
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
12Gbps/non-blocking |
Throughput |
8.928Mpps @64 bytes |
Address Table |
8K entries |
Share Data Buffer |
4.1 Mb |
Jumbo Frame |
9216 Bytes |
SDRAM |
1Gb |
Flash Memory |
128Mb |
Flow Control |
IEEE 802.3x pause frame for full-duplex ; Back pressure for half-duplex |
Reset Button |
>2 sec.: Factory default and reset |
Power Supply |
48 ~ 57 VDC, 50/60Hz,Dual DC for PoE support 12VDC ~ 48VDC for non PoE support |
PoE Standards |
IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE
|
PoE Power Supply Type |
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
|
LED Indicators |
Power: Green Solid on?power work normal,off?power disconnected
System:Green
Blink?work normally, solid on?soft work abnormal, fast blink?soft upgrade
PoE: Yellow
Solid on?PoE work normally, Off?PoE doesn?t work, Blink?PoE overload
10/100/1000T RJ45 Interfaces (Port 1 to Port 4): 1000 LNK/ACT (Green),
Blink?port connected with data transmission;
Solid on?port connected without data transmission
100/1000Mbps SFP Interfaces (Port 5 to Port 6): Green
Blink- port connected with data transmission;
Solid on- port connected without data transmission
|
EMC |
Surge Immunity:6KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2;EFT Level 4 Per: IEC61000-4-4
|
Dimension |
145x112x47.2mm |
Weight |
0.6kg |
Working Temperature |
-40°C to 75°C |
Storage Temperature |
-40°C to 80°C |
Operation Humidity |
5% to 95%, non-condensing |
MTBF |
50,000hrs |
Layer 2 functions
Port configuration |
Auto-negotiation Flow Control
Port Mirror: TX/RX/BOTH; Many-to-1 monitor
CPU Mirror
Traffic statistics
|
Link Aggregation |
Static link aggregation LACP(Dynamic Trunk/Static Trunk)
Algorithm based on Source/Destination MAC
Algorithm based on Source/Destination IP
|
MAC Table |
Aging Time Static MAC address
Dynamic MAC address management
|
VLAN |
4094 Active VLANs 4094 VID
802.1Q Tag VLAN
Port VLAN
Protocol VLAN
MAC VLAN
Voice VLAN
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
GARP/GVRP
|
ACL |
256ACLs L2, L3 e L4
Time-based ACL
IP ACL
MAC ACL
MAC-IP ACL
User-Defined ACL
ICMPv6
|
Spanning tree |
802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP)
802.1s Multiple Spanning Tree Protocol (MSTP)
Loop Guard
Root Guard
TC-BPDU Guard
BPDU Guard
BPDU Filter
|
Ring Protection |
<20ms G.8032 ERPS Ring Fast Ring
ALLNET Ring, < 20ms
|
Multicast |
256 groups IGMP v1/v2/v3 Snooping, Fast Leave
MLD Snooping
Multicast VLAN
IGMP filter
MVR
Multicast Routing
|
QOS |
8 mapping IDs to 8 level priority queues CoS port-based
CoS 802.1p-based
CoS DSCP-based
Scheduling algorithms SP, WRR, SP+WRR
Storm Control (Broadcast, Multicast, Unknown Unicast)
Bandwidth control per port
SWRR, DWRR for Scheduling
Flow Redirect
Precedence
TOS
Rate Limiting(Ingress/Egress)
Stri Priority
|
Security Features |
Port Security MAC address filter
ARP Association (Manual, ARP scanning, DHCP snooping)
ARP Protection
AAA
DAI
DoS (Denial of Service)
Classification of packages based on: End.MAC, IP End, TCP / UDP Ports,
Protocol Type;
802.1x Authentication (port-based e MAC-based)
TACACS/TACACS+ Authentication
RADIUS Authentication
DHCP Filter
Guest VLAN
SSLv2/SSLv3/TLSv1
SSHv1/SSHv2
Restriction of WEB access based on: IP Address, And. MAC and Port;
Port Isolation
Loopback detection
|
Management |
SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups
WEB (HTTP/HTTPS)
CLI (Telnet, Console, SSHv1/v2)
Firmware upgrade via console/web/TFTP
Configuration Backup/Reload
Dual Firmware
LLDP
Configuration Export/Import
CDP Aware
OAM (IEEE802.3ah)
CFM (IEEE802.1ag)
sFlow
Telnet Client
|
Synchronization, IEEE1588
|
Support IEEE1588v2 transparent clock |
Other Features |
DNS Client DHCP Relay
DHCP Client
DHCP Snooping
DHCP Option 66
DHCP Option 67
DHCP Option 82
NTP/SNTP Client
UPNP
UDLD
|
PoE management |
Total PoE power budget control Per port PoE function enable/disable
PoE admin-mode control
PoE port power feeding priority
Per PoE port power limitation
PD classification detection
PD alive check
PoE schedule
Soft-reboot PoE Non-stop
|
Maintenance |
Cable Diagnostics Ping
SFP DDM (Digital Diagnostics Monitoring)
Thermal protection
System log (Local and Remote)
Memory and CPU Monitoring
Tracert/ Tracert 6
|
Layer 3 functions
Static Routing |
IPv4 Unicast: Static Routing (Software Base) IPv6 Unicast: Static Routing (Software Base)
|
IPV6 |
IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery
Internet Control Message Protocol (ICMP) version 6
TCPv6/UDPv6
Ping6
Telnet(v6)
Http/Https
Interface IPV6
ACL IPV6
|
Back
Outdoor Switches
For special outdoor applications we offer IP67 outdoor switches with PoE.
Special features:
- Fanless metal housing with optimized heat dissipation
- Extended temperature range from -40° ~ +75
- IP67 protection class with waterproof metal housing
- Overvoltage protection with 6KV (10/700us)
- PoE according to IEEE802.3at (30W) and IEEE802.3af (15.4W)
- Passed tests: IEC60068-2-6 (Vibration) / IEC60068-2-27 (Impact) / IEC60068-2-32 (Free Fall)