ALLNET Switch full managed industrial 12 Port Gigabit 240W / 8x PoE+ / 4x SFP / Fanless / DIN / "ALL-SGI8112PM"
Highlights:- 8-Gigabit ports with PoE AF-AT support up to 30Watt per port
- 4x SFP ports for fiber Gbics e.g. ALL4750-INDU / ALL4751-INDU etc.
- PoE Ports 1-8 max. PoE IEEE802.3at 30W
- Layer2+ features like 802.1Q VLAN, Port Isolation IGMP, LLDP, PoE+ Management, IP source Guard, ACLs etc.
- Supports Spanning Tree STP (802.1D) and RSTP (802.1W) and MSTP (802.1s)
- Supports PoE management like PoE scheduling, PoE PD-alive, Port PoE Priority, Soft-Reboot PoE Non-Stop
- Supports G.8032 quick ring protocol. Self-healing <20ms
- Max. PoE budget = 240 watts
- Fanless metal housing with optimized heat dissipation
- Easy to use as a desktop, wall mount or DIN rail device
- Extended temperature range from -40°C ~ +75°C
ALL-SGI8112PM Industrial Switch is a Layer 2+ managed Gigabit PoE Switch that features 8-Port Gigabit 802.3af/at PoE + 4-Port Gigabit SFP optical port,is specially designed to build a full Gigabit backbone to transmit reliable and high-speed data in heavy industrial demanding environments and forward data to remote network through fiber optic cabling. It comes with an IP40 rugged case and redundant power system. The industrial managed switch provides user-friendly but advanced IPv6/IPv4 management interfaces and Soft-reboot PoE Non-stop function.It is the best investment for expanding industrial business or upgrading its network infrastructure.
Features: - Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, PoE+ management, IP Source Guard, ARP inspection, ACLs etc
- Support spanning tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s)
- Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
- Support cable diagnosis
- Dual firmware backup
- Support PoE management, like PoE schedule, PoE PD-alive,Port PoE Priority,Soft-Reboot PoE N on-stop
- Support G.8032 quick ring protocol. Self-recovery time <20ms
- Support IEEE1588 v2, transparent clock(TC)
- Support DDM, SFP digital diagnostics monitoring
- Support IPV4 and IPV6 static routing functions
- Support memory and CPU monitoring
- 6KV surge protection, 6KV contact/8KV air ESD protection
Intelligent PD?Alive Check for Frozen PDs
The ALL-SGI8112P Mindustrial PoE switch 8 ports can be configured to monitor connected PD?s status in real time. Once the PD stops working and responding, the ALL-SGI8104v2PM will reboot the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator?s management burden.
PoE Schedule Function for Energy Saving
For environmental protection purpose, the ALL-SGI8112PM switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
Scheduled PD Re-starting
The ALL-SGI8112PM smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.
Fast Recovery Redundant Ring for Critical Network Applications
The ALL-SGI8112PM supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer?s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms.
1588 Time Protocol for Industrial Computing Networks
The ALL-SGI8112PM is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
Strong Layer 2 Features
The ALL-SGI8112PM layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the ALL-SGI8112PM allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well.
Efficient and Various Management Methods
For efficient management, the ALL-SGI8112PM is equipped with console, Web and SNMP management interfaces.
With the built-in Web-based management interface, it offers an easy-to-use, platform-independent management and configuration facility.
For text-based management, it can be accessed via Telnet and the console port.
Intelligent PoE Switch SFP DDM Function
The ALL-SGI8112PM supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Technical Details:Hardware Specification |
|
Model
|
ALL-SGI8112PM
|
Copper Ports
|
8-10/100/1000BASE-T RJ45 auto-sensing ports
|
Fiber Ports
|
4-100/1000BASE-T SFP interfaces, supports 100/1000Mbps dual mode
|
PoE Ports
|
8-802.3af/802.3at PoE Injector Ports
|
Console Ports
|
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
|
Switch Architecture
|
Store-and-Forward
|
Switch Fabric
|
24Gbps/non-blocking
|
Throughput
|
17.856Mpps@64 bytes
|
Address Table
|
8K entries
|
Share Data Buffer
|
4.1 Mb
|
Jumbo Frame
|
9216 Bytes
|
SDRAM
|
1Gb
|
Flash Memory
|
128Mb
|
Flow Control
|
IEEE 802.3x pause frame for full-duplex ; Back pressure for half-duplex
|
Reset Button
|
>2 sec.: Factory default and reset
|
Power Supply
|
48 ~ 57 VDC, 50/60Hz,Dual DC
|
Power consumption |
without PoE ?12W |
PoE Standards
|
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
|
PoE Power Supply Type
|
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
|
LED Indicators
|
Power: Green
Solid on--power work normal,off--power disconnected System:Green
Blink--work normally, solid on--soft work abnormal, fast blink--soft upgrade PoE: Yellow
Solid on--PoE work normally, Off--PoE doesn?t work, Blink--PoE overload
10/100/1000T RJ45 Interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green), Blink--port connected with data transmission; Solid on--port connected without data transmission
100/1000Mbps SFP Interfaces (Port 9 to Port 12): Green
Blink- port connected with data transmission; Solid on- port connected without data transmission
|
EMC
|
Surge Immunity:6KV Per: IEC61000-4-5
ESD Protection: ESD Level 4 Per: IEC61000-4-2;EFT Level 4 Per: IEC61000-4-4
|
Dimension
|
165x123x53.5mm
|
Weight
|
1.0kg
|
Working Temperature
|
-40°C to 75°C
|
Storage Temperature
|
-40°C to 80°C
|
MTBF
|
50,000hrs
|
Layer 2 functions |
|
Port configuration
|
Auto-negotiation Flow Control
Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror
Traffic statistics
|
Link Aggregation
|
Static link aggregation LACP(Dynamic Trunk/Static Trunk)
Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP
|
MAC Table
|
Aging Time
Static MAC address
Dynamic MAC address management
|
VLAN
|
4094 Active VLANs
4094 VID
802.1Q Tag VLAN
Port VLAN Protocol VLAN MAC VLAN
Voice VLAN
802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP
|
ACL
|
256ACLs L2, L3 e L4
Time-based ACL IP ACL
MAC ACL MAC-IP ACL
User-Defined ACL
ICMPv6
|
Spanning tree
|
802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP)
802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard
Root Guard
TC-BPDU Guard
BPDU Guard BPDU Filter
|
Ring Protection
|
<20ms G.8032 ERPS Ring
Fast Ring
|
Multicast
|
256 groups
IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping
Multicast VLAN IGMP filter MVR
Multicast Routing
|
QOS
|
8 mapping IDs to 8 level priority queues CoS port-based
CoS 802.1p-based
CoS DSCP-based
Scheduling algorithms SP, WRR, SP+WRR
Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port
SWRR, DWRR for Scheduling Flow Redirect
Precedence TOS
Rate Limiting(Ingress/Egress) Stri Priority
|
Security Features |
Port Security
MAC address filter
ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection
AAA DAI
DoS (Denial of Service)
Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type;
802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication
RADIUS Authentication DHCP Filter
Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2
Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation
Loopback detection
|
Management |
SNMP v1/v2c with Full Private MIBs RMON 4 groups
WEB (HTTP/HTTPS)
CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload
Dual Firmware LLDP
Configuration Export/Import CDP Aware
OAM (IEEE802.3ah) CFM (IEEE802.1ag)
sFlow
|
Syncronization, IEEE1588 |
Support IEEE1588v2 transparent clock
|
Other Features |
DNS Client
DHCP Relay
DHCP Client
DHCP Snooping
DHCP Option 66
DHCP Option 67
DHCP Option 82 NTP/SNTP
Client UPNP
UDLD
|
PoE management |
Total PoE power budget control
Per port PoE function enable/disable PoE admin-mode control
PoE port power feeding priority Per PoE port power limitation PD classification detection
PD alive check PoE schedule
Soft-reboot PoE Non-stop
|
Maintenance |
Cable Diagnostics Ping
SFP DDM (Digital Diagnostics Monitoring) Thermal protection
System log (Local and Remote) Memory and CPU Monitoring
|
Layer3 functions |
|
Static Routing |
IPv4 Unicast: Static Routing(Software Base)
IPv6 Unicast: Static Routing(Software Base)
|
IPV6 |
IPv6 neighbor discovery (ND)
Path maximum transmission unit (MTU)
discovery Internet Control Message Protocol
(ICMP) version 6 TCPv6/UDPv6
Ping6
Telnet(v6)
Http/Https
Interface
IPV6
ACL IPV6
|
|
| | ALLNET Switch Modul ALL4750-INDU SFP(Mini-GBIC), 1000Mbit, SX/LC, Industrial -40/+85 Grad, | | | ALLNET Switch Modul ALL4751-INDU SFP(Mini-GBIC), 1000Mbit, LX/LC, 10Km, Industrial, -40/+85 Grad, | | | Mean Well Netzteil - 48V 240W Hutschiene | | | ALLNET ALL-B100-24VDC / Power-Booster 24VDC to 48~55VDC max. 95W HUT/DIN-Mounting | | | ALLNET Switch Modul ALL4765 SFP(Mini-GBIC), 1000Mbit, RJ45(TP), | | | Mean Well Netzteil - 48V 480W Hutschiene | | | Mean Well Netzteil - 48V 960W Hutschiene | | | TP(RJ45) POE-Tester, at/af, Endspan/Midspan, standard, Synergy 21, | | | Mean Well Netzteil - 48V 120W Hutschiene | | | Synergy 21 Netzteil - 48V 480W Mean Well Hutschiene parallel Funktion | | | ALLNET 19"Wandgehäuse, 6HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit | | | ALLNET 19"Wandgehäuse, 9HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit | | | ALLNET 19"Wandgehäuse, 12HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit | | | ALLNET 19"zbh. Gerätehalter für Hutschiene/DIN-Rail Geräte, T150mm/5HE, Lichtgrau, Frontmontage, | | | ALLNET DIN-RAIL Wandgehäuse, T223mm, Lichtgrau, IP55, SO-DIN-Serie, |
Back |