The basis - IP control units
Intelligent building technology contributes to an increase in safety and comfort and at the same time also ensures active savings in energy costs.
Centrally controlled and accessible via the Internet, ALLNET building automation allows intelligent and flexible access to the building technology and, of course, independently of the personal location. In addition to monitoring sensor values, it is also possible to switch actuators and other consumers. The control centers are scalable and can be networked with each other across locations, which allows adaptation to a wide range of scenarios.
ALLNET sensor meters can be used to control and switch lights, blinds, ventilation or any connected devices. In addition, the temperature detection and demand-based heating of individual rooms, control of garden irrigation, alarming in case of gas smell and water intrusion up to the automatic opening and closing of the blinds depending on the daylight and much more - there are no limits to your ideas.
Control Units
Other MSE end devices that also have 1x I2C sensor port
Know what's going on!
|
Interfaces: |
1x Direct Phase Contacts (L1/L2/L3/N) max. 32A 1x I2C Port for additional sensors & actors of ALLNET Building Automation products www.allnet.de/en/allnet-brand/produkte/building-automation/automation-steuer-computer/building-automation-sensors/ 1x USB 2.0 4x TTL Outputs 4x Open Collector Output 1x Console RS232 1x OLED-Display 1x LAN 10/100Mbps 1x WIFI 1T1R 150Mpbs
|
Network Connector: |
1x RJ45 10/100Mbps |
Power supply: |
100~240 VAC, 50/60 Hz, internes PSU |
Consumption: |
<5 Watt maximal |
Housing: |
DIN-Rail housing 12TE subunits |
Environment: |
Temperature operation: 0 ~ 40 °C Operating Humidity: 10% ~ 85% (non-condensing) Temperature Storage: -20 ~ 60 °C Humidity Storage: 5% ~ 90% (non-condensing) |
Dimensions: |
160 x 91 x 63 mm (length x width x height) |
Weight: |
370 grams (without packaging and accessories) |
Marks: |
CE, RoHS |
Package contents: |
|
Downloads
Back