Tel.: +49 (0)89 / 89422222
Please choose your country:
Choose a language
We are a developer and manufacturer of advanced networking and communications technology. Our innovative networking, storage, security and home automation products are designed in our own laboratories and distributed in many European countries.

Extensions - IP Powermeter

Measure power consumption, reduce costs sustainably

ALLNET Powermeters help you to identify load peaks and power consumers and to reduce power consumption sustainably on the basis of the measured values. The ALLNET Powermeters can directly access the three phases of the power line and thus provide exact consumption data. The consumption data is tapped via induction terminals without the need to intervene in the house wiring. This increases safety and convenience in equal measure and allows uncomplicated use in any application scenario. Numerous network functions allow individual further processing with the ALLNET sensor meters, as well as targeted evaluation and archiving of the data.

Inductive power clamps 50A, 200A & 800A

"The compact divisible cable conversion current transformers (50A & 200A) are especially suitable for retrofitting in existing installations. Cable conversion current transformers are particularly used in cases where the current path must not be interrupted.
For the 800A transformers, the current path must be interrupted and the power cable must be passed through the transformer. "

S0 - Pulse generator

"The S0 interface is used by gas meters, water meters, electricity meters, heat meters and for general consumption measurement in building automation.
The meter readings are transmitted by pulses. The signal is generated by the meter as a current pulse. A current flow of less than 3 mA corresponds to a LOW value. If the current flow is greater, this is interpreted as a HIGH value."

D0, SML, OBIS Key figures

"Modern electronic household meters (digital meters) have an optical front interface (infrared), which is designed according to the requirements of the

-DIN EN 62056-21: Meter reading transmission, tariff and load control Part 21: Data transmission for fixed and mobile connection
-SML: Smart metering language, a communication protocol for electricity meters.

is structured.

For example, bidirectional meters for photovoltaic systems are prescribed by the network operator as digital electricity meters; these usually have this so-called D0 infrared interface. The reading is done with a D0 reading head and the corresponding power meter. The recognition of the interface protocol and the identification by means of OBIS codes, reference and feed-in data can then be recorded and displayed in separate channels. Although there is a D0 standard, unfortunately the manufacturers of the power meters do not adhere to it. This means that the last bits and bytes of these OBIS key figures are unfortunately not identical for all of them. This has led to the fact that we keep a compatibility list and only the electricity meters which are included in the list can be used.

Recommendation: Buy a compatible D0 electricity meter (see compatibility list) and install it behind your current electricity meter from your energy supplier. Why? Even if the current electricity meter installed by your utility is compatible with our system, it is possible that it will be replaced at any time. This would, of course, cause your installation to stop working from that point on.

Differences between the power meters

Powermeters


 
pdf-download 101241-1  pdf-download 101241-2  Art. nr. 101241

> Zum Online Shop

  • Power Source and Consumption monitoring

  • accessible via LAN/WLAN

  • Analyse Power Consumption and feed

  • Sensors capture measured values ??over

  • controlling and switching

  • save electricity!

 

 

 

The Allnet ALL3692 is the consistent further development of the successful ALL369x Power Meter series, this time for D0 power meter with optical output. This concrete and calibrated readings are always recognized.

 

 

  • Instrument for monitoring and control of your current power consumption at several measuring points
  • Via the Internet from anywhere accessible (Internet connection at the location of ALL3692 required)
  • Easy operation and installation through Web interface and the D0 OKK optical read head ALL3688, alternatively ALL3689 (no interference with the house wiring necessary)
  • integrated web server
  • Email alerting at a set value is exceeded
  • 4 x D0 ports allows you to connect with each D0 power meter with optical output (ALL3688/ALL3689)
  • Extensive consumption display with live chart, chart function, table display, etc.
  • Possibility to download the readings in database format, eg as a CSV file
  • Interfaces: 1 x network, 1x 300Mbit Wireless, D0 4x, 2x I2C sensor / port, 2x External USB ports

 

 

 Easy installation by placing the OKK optical D0 read head with its magnetic ring on one of the supported meters listed in the compatibility list (Attention! Not listed meters could be made compatible by a software adaptation. It is not necessary to calibrate the ALL3692 using the D0 signals of the calibrated electricity meter. No intervention in the 230V house wiring is necessary.

 

 

 




Features und web interface:

 


The "Speedometer??" Display of our power meter allows you to check live, what you up to date on current consumption each phase and also shows you the recognized current cost of consumption.

 



 

 

 

The additional sensor ports, you can optionally measured values ??such as Temperature, air pressure, brightness and to define optionally actuators.

 

 

 

 

 

 

 

 

The power meter allows you to graphically represent your consumption. You can represent a daily, weekly, monthly or yearly graphs and single-phase or hide.




The configuration page of the Power Meter gives you the opportunity to set individual values ??within the device. This includes the cost of power consumption, labels and graph colors.

 

 

 




If you want to reuse or export for archiving the determined values ??of the power meter, you can export it easily via the web menu as CSV or SQL Lite file.




The live charts of the device you graphically represents the current power consumption of the device. Here you have the possibility to compare directly single-phase power lines.


 

 

 


Technical Details:

 

 

 

Item

 

 

Specification

 

 

Interfaces:

 

 

 

4x D0 for D0-compatible power meter with optical output

2x RJ 45 Ports for sensor and/or actuator

2x USB for external use

1x RS232 System console port

 

 

Internal Memory:

 

 

4GB USB Flash memory stick

 

 

Network Interface:

 

 

1x RJ45 10/100Mbps

1x 2,4 GHz Wireless N, up to300 Mbps

 

 

network protocols:

 

 

HTTP/HTTPS, TCP/IP, SNTP, SMTP, SSH

 

 

operating Systems:

 

 

all network-capable operating system with a browser

 

 

Power input:

 

 

100~240 V AC, 50/60 Hz, external Power Supply

 

 

Power consumption:

 

 

<3 watt (without additional modules, sensors and actuators)

 

 

Case:

 

 

Aluminum case with mounting bracket for wall mounting

 

 

Environment:

 

 

Temperature operating: 5 ~ 40 °C

Humidity operating: 10% ~ 85% (non-condensing)

Temperature storage: -20 ~ 60 °C

Humidity storage: 5% ~ 95% (non-condensing)

 

 

Certificates:

 

 

CE, RoHS

 

 

Dimension:

 

 

155 x 28 x 26 mm (Lenght x Width x Height)

 

 

Weight:

 

 

260 grams (only device)

 

 

Warranty:

 

 

36 months

 

 

Package content:

 

 

1x ALL3692

1x ALL3688 OKK optical D0 readhead

1x Readhead-connection cable

2x WLAN Antennas

1x Ethernetcable

1x Power supply 230VAC - 12V DC 2A

2x universal brackets

1x manual

 



Product Video

 

Accessory

 Article NoProductname
ALLNET MSR Powermeter Zubehör Optischer D0-Lesekopf Standard "ALL3689"
ALLNET MSR Powermeter Zubehör Optischer D0-Lesekopf Exclusiv "ALL3688"
ALLNET MSR IO Zentrale Schaltsteckdosenleiste 6-fach inkl. Messgerät für Desktop & 19" Montage "ALL4176" für IP Gebäude Automation ALL4176v3
ALLNET MSR IO Zentrale Schaltsteckdose inkl. WLAN "ALL3073V3WLAN" für IP Gebäude Automation
ALLNET MSR IO Zentrale Schaltsteckdose ALL3075v4 inkl. WLAN & Strommessung für IP Gebäude Automation
ALLNET MSR Zentrale "ALL3419" inkl. 3 Sensor Ports & WLAN & Temperaturfühler "ALL3006" für IP Gebäude Automation
ALLNET MSR Zentrale "ALL3500" inkl. 4 Sensor Ports & WLAN für IP Gebäude Automation
ALLNET MSR Zentrale "ALL3505" inkl. 8 Sensor Ports & Hutschienen Montage für IP Gebäude Automation
ALLNET MSR zbh. ALL3089 / IP-Symcon Prof. Software für ALL3000/ALL4000
ALLNET MSR zbh. ALL3088 / IP-Symcon Basic Software für ALL3000/ALL4000


Downloads



Back

Powermeter Accessories