SmartLink technology
The new ALLNET powerline home next Generation
The new smart technology enables a reliable and faster data transmission and therefore delivers a significantly higher speed update for powerline user. Existing powerline adapters only use two out of three wires. SmartLink now uses not only the phase and neutral conductor but also the ground wire for data transmission. Thereby it can fulfill the full performance potential of the electricity line. Besides a considerably speed gain of up to 1200Mbit, the reach and reliability of the powerline signal is also increased. Even isolated rooms in basements or lofts are now onnected with a higher data rate.
Highlights
- Supports MIMO, thereby double the transmission speed compared to 600 Mbit PowerLine
- Powerful internet connection with significantly higher range
- Uses ground next to phase an neutral
- Optimized signal interference on powerline for better transmission
- Automatic selection of best communications method
1200Mbit Powerline Adapter SmartLink
Highlights: |
Element
|
Spezifikation
|
Chipset:
|
Qualcomm QCA7500 + QCA8334
|
Standards:
|
? IEEE 1901, IEEE 1905.1 and HomePlug AV Compliant
? HomePlug AV2 Compliant
? AV2 30MHz and 67MHz MIMO profi les
? AV2 30MHz and 67MHz SISO profi les
? Power Save mode
? Co- existence with HomePlug 1.0/Turbo Nodes
? Compliant to ErP 2013 directive
? IEEE 802.3 10/100/1000 Ethernet(1200Mbps)
|
Brutto data rate Powerline:
|
up to 1200Mbps
|
Frequency band:
|
2MHz to 67,5 MHz
|
Access-Methode Powerline:
|
Priority-based CSMA/CA channel access
|
Quality of Service:
|
|
Modulation:
|
OFDM 4096/1024/256/64/16/8 QAM, QPSK, BPSK, ROBO, und Mini-ROBO Modulation Schema
|
Powerline interface:
|
Type F earthing contact connector (DE), Type C/E (FR)
|
Network interface:
|
1x RJ45 10/100/1000Mbit
|
IGMP:
|
|
Nodes/Clients:
|
max. 15 devices
|
Security support:
|
128bit AES Link encryption with key management
(aktivated via Simple Connect button)
|
LED indicators:
|
Power LED PowerLine Link/ACT Status LED 2x Ethernet Link/ACT Status LED
|
Power supply:
|
Type F earthing contact connector (DE), Type C/E (FR) Switch mode 110VAC to 240VAC
|
Power over Ethernet: |
Data PIN´s: 1,2 & 3,6 Power: 4,5 & 7,8 Max. 30 PoE IEEE802.3at 48V |
Operating systems:
|
all TCP/IP operating systems
|
Operating systems for
configurationsoftware:
|
Windows® XP32bit, Windows® Vista32/64bit, Windows®7 32/64bit
|
Housing:
|
synthetic housing
|
Environment:
|
Temperature operating: 0 ~ 40 °C
Humidity operating: 30% ~ 80% (non condensing)
Temperature storage: -25 ~ 70 °C
Humidity storage: 30% ~ 95% (non condensing)
|
Marks:
|
CE, RoHS
|
Dimensions:
|
115 x 65 x 30mm
|
Weight:
|
300g (only device)
|
Package content:
|
1x ALLNET ALL1681203 1x RJ45 patch cable 1m 1x CD-ROM with manual & software
|
Downloads
Back