Power over Ethernet PD Repeater

The ALLNET PoE PD repeaters offer a first-class solution for particularly long distances. This is very practical in warehouses and larger buildings, for example. A classic PoE connection supports a maximum of 100m. Since you can connect up to 6 repeaters successively, you can reach up to 700m range, as one repeater extends the range by 100m each. Especially when there are no other sockets available, it could be the perfect solution. Through this technology, you can both power a surveillance camera or an information monitor, for example, and connect it to the network with the same cable. There is an indoor, as well as outdoor variant.

Entry Line Outdoor IP68 - max. 500m

Outdoor IP67 - PoE Repeater / Switch - max. 300m

ALLNET PoE 2x Extender Repeater Outdoor Switch IP67

Art. nr. 189128

> Zum Online Shop

Highlights:

Outdoor IP67 Gigabit Extender Repeater.
1x 10/100/1000M PoE (IEEE802.3bt POE+) INPUT
2x10/100/1000M PoE (IEEE802.3af /at POE+) OUTPUT
Extended operating temperature: -20°C to +60°C

The new ALL-PR2013O-30W is a small 2-port PoE switch or PoE repeater and extends the PoE signal by 100 meters each. This length is normally the maximum distance for PoE supply from power and data. With the help of the repeater, up to 300 meters of PoE can be achieved if a new device is installed every 100 meters. This is only possible because it is an active device and the signal is always reprocessed. The repeater is fed with IEEE802.3bt and outputs IEEE802.3af/at PoE up to 70 watts. The certification for protection classes -IP67 makes the product suitable for outdoor use, as it is dustproof and protected against heavy splash water and short submersion. To give you a better idea of the concept of an outdoor repeater, here are some usage scenarios:

Power and data supply of an outdoor IP camera and an access point simultaneously
Connection of two IP cameras with simultaneous power supply
Possibility of an emergency IP phone outside the company building
Bridging of a longer distance between two buildings

A BT power supply is required!!! e.g. 188381

Technical Details:

Model

ALL-PR2013O-30W

Standard

IEEE802.3
IEEE802.3u
IEEE802.3ab
IEEE802.3x
IEEE802.3af
IEEE802.3at
IEEE802.3bt

Port

PoE in port:1 x 10/100/1000Mbps RJ45 port

PoE out port : 2 x 10/100/1000Mbps RJ45 port

Network Media(Cable)

10BASE-T: UTP category 3,4, 5 cable (?100m)

100BASE-TX: UTP category 5,5e cable (?100m)

1000BASE-TX: UTP category5e cable (?100m)

LED

LAN

PoE Standard

IEEE802.3af/at/bt

Dimensions (L*W*H)

150*73*44MM

RJ45 PoE

PoE in port: PoE PIN 1/2 = (+) PIN 3/6 = (-) or PIN 4/5 (+) and PIN 7/8 = (-)

PoE out port: PINS 1/2 = (+) and PINS 3/6 = (-)

PoE port

2

Power Supply

PoE

PD port input

95W Max

PoE Power Output

Per port 48-55V DC Max.30W IEEE802.3at

Operating Temperature

-20°C ~ 60 °C

Storage Temperature

-40 °C ~ 80 °C

Operating Humidity

10% ~ 90% non-condensing

Storage Humidity

5% ~ 90% non-condensing

Surge Protection

Differential mode±4KV, Common mode±6KV

MTBF

>50000 hour

Electrostatic standard

Contact 6KV,air 8KV

Weather Rating

IP67

Vandal Proof

IK10

Marks

CE

Accessory
	Article No	Productname
		ALLNET PoE Injektor Gigabit PoE & PoE bt (15,4W/30W/45/75/95W) / IEEE802.3bt Kunststoffgehäuse / "ALL0495BT"
		TP-Stecker TP, Feldkonfektionierbar, CAT6A, RJ45, Werkzeuglo
		Patchkabel RJ45, CAT6A 500Mhz, 0.25m, schwarz, S-STP(S/FTP), PUR(Außen/Outdoor/Industrie), AWG26, Synergy 21
		Patchkabel RJ45, CAT6A 500Mhz, 1.0m, schwarz, S-STP(S/FTP), PUR Indoor/Outdoor/Indu (UV/Water/oil/-resistant), AWG26, mit CAT7 Rohkabel, Synergy 21
		Patchkabel RJ45, CAT6A 500Mhz, 1.5m, schwarz, S-STP(S/FTP), PUR Indoor/Outdoor/Indu (UV/Water/oil/-resistant), AWG26, mit CAT7 Rohkabel, Synergy 21
		Patchkabel RJ45, CAT6A 500Mhz, 3m, schwarz, S-STP(S/FTP), PUR Indoor/Outdoor/Indu (UV/Water/oil/-resistant), AWG26, mit CAT7 Rohkabel, Synergy 21
		Patchkabel RJ45, CAT6A 500Mhz, 7.5m, schwarz, S-STP(S/FTP), PUR Indoor/Outdoor/Indu (UV/Water/oil/-resistant), AWG26, mit CAT7 Rohkabel, Synergy 21