Switch working:

Layer 2-Switch, Web easy smart managed

Switch-Typ:

standalone

Standards:

IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000BASE-T

IEEE802.3az EEE

IEEE802.3ad Link Aggregation

IEEE802.1q VLAN

IEEE802.1p-based QoS

Switching-Ports:

5x RJ45 10/100/1000BaseT(X)

4x PoE IEEE802.3at max. 30W per Port

Special:

4x PSE Port for PoE Devices

Uplink:

yes

Full Duplex Mode:

yes

Buffer Memory:

1Mbits

Jumbo Frames:

9216byte

 MAC adress table:

2K

Filtering/Forwarding:

Store-and-Forward

LED Define:

Power/System: Green LED

• Off: power off or fail
• On: power on
• Blinking: system booting up

PoE Alert: Green LED

• Off: No over PoE max power budget (50W)
• On: Over PoE max power budget (50W)

RJ 45 Port:

LINK/ACT: bio-color LED

• Off: port disconnected or link fail
• Green on: 1000Mbps connected
• Amber on: 10/100Mbps connected
• Blinking: sending or receiving data

PoE:

• Off: PoE power output off
• Green on: PoE power output on

Layer2 Basic:

Port:

Auto Negotiation of speed and duplex modes

Jumbo frame support

Mirror:

Port mirroring both on ingress and egress traffic

VLAN:

802.1Q VLAN

Port-based VLAN

LACP:

Link Aggregation = IEEE802.3ad

Multicast:

Blocking of unknown multicast traffic

Qos:

IEEE802.1p-based QoS

Port-based QoS

Scheduling Method = WFQ or SP

IGMP Snooping:

Support IGMPv1 Snooping RFC 1122, RFC4541

Support IGMPv2 Snooping RFC 2236, RFC4541

Support IGMPv3 Snooping(Partial) RFC 3376

Security:

STP / Self Loop Support

Broadcast Storm Control Support

Management:

User Interface Web-based Management

User Account System password protection

PoE:

PoE power output On/Off management

Power Input:

Power-Input:

AC to DC external power adapter

Input: 100~240V AC

Output: 55VDC / 1,3A

Housing:

Metall/ Desktop

PoE Output power capacity:

Maximum output :30W per each port

1. Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or

PoE+

2. Automatically discover the connection of PD device and immediately sends power to it

3. Auto disable port if the port current is over 700mA or short happens

4. Priority default setting is lower port NO. has high priority

5. The maximum power used by power devices is defined by the following classification.

When Port works in Auto Mode, the output port power limit will be associated with PD

classification Value.

6. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out

power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable

Dimension:

193 x 84 x 26mm

Environment:

Operating Temperature: 0 ~ 50 °C

Operating Humidity: 10% ~ 90% (non condensing)

Storage Temperature: -40 ~ 70 °C

Operating Humidity: 5% ~ 90% (con condensing)

Marks:

CE FCC EMI class B, ROHS

Switch working:

Layer 2-Switch, Web easy smart managed

Switch-Typ:

standalone

Standards:

IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000BASE-T

IEEE802.3az EEE

IEEE802.3ad Link Aggregation

IEEE802.1q VLAN

IEEE802.1p-based QoS

Switching-Ports:

5x RJ45 10/100/1000BaseT(X)

4x PoE IEEE802.3at max. 30W per Port

Special:

4x PSE Port for PoE Devices

Uplink:

yes

Full Duplex Mode:

yes

Buffer Memory:

1Mbits

Jumbo Frames:

9216byte

 MAC adress table:

2K

Filtering/Forwarding:

Store-and-Forward

LED Define:

Power/System: Green LED

• Off: power off or fail
• On: power on
• Blinking: system booting up

PoE Alert: Green LED

• Off: No over PoE max power budget (50W)
• On: Over PoE max power budget (50W)

RJ 45 Port:

LINK/ACT: bio-color LED

• Off: port disconnected or link fail
• Green on: 1000Mbps connected
• Amber on: 10/100Mbps connected
• Blinking: sending or receiving data

PoE:

• Off: PoE power output off
• Green on: PoE power output on

Layer2 Basic:

Port:

Auto Negotiation of speed and duplex modes

Jumbo frame support

Mirror:

Port mirroring both on ingress and egress traffic

VLAN:

802.1Q VLAN

Port-based VLAN

LACP:

Link Aggregation = IEEE802.3ad

Multicast:

Blocking of unknown multicast traffic

Qos:

IEEE802.1p-based QoS

Port-based QoS

Scheduling Method = WFQ or SP

IGMP Snooping:

Support IGMPv1 Snooping RFC 1122, RFC4541

Support IGMPv2 Snooping RFC 2236, RFC4541

Support IGMPv3 Snooping(Partial) RFC 3376

Security:

STP / Self Loop Support

Broadcast Storm Control Support

Management:

User Interface Web-based Management

User Account System password protection

PoE:

PoE power output On/Off management

Power Input:

Power-Input:

AC to DC external power adapter

Input: 100~240V AC

Output: 55VDC / 1,3A

Housing:

Metall/ Desktop

PoE Output power capacity:

Maximum output :30W per each port

1. Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or

PoE+

2. Automatically discover the connection of PD device and immediately sends power to it

3. Auto disable port if the port current is over 700mA or short happens

4. Priority default setting is lower port NO. has high priority

5. The maximum power used by power devices is defined by the following classification.

When Port works in Auto Mode, the output port power limit will be associated with PD

classification Value.

6. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out

power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable

Dimension:

193 x 84 x 26mm

Environment:

Operating Temperature: 0 ~ 50 °C

Operating Humidity: 10% ~ 90% (non condensing)

Storage Temperature: -40 ~ 70 °C

Operating Humidity: 5% ~ 90% (con condensing)

Marks:

CE FCC EMI class B, ROHS