Switches Industriales para el carril DIN
La diferencia entre Switches industriales y normales es su forma de instalación, que normalmente se montan en un carril DIN. Además, los Switches industriales tienen rangos de temperatura ampliados y entradas de alimentación redundantes. Esto significa que puede alimentar su Switch con una fuente de almientación y un conector Phoenix. Además su diseño es más pequeño para p.ej. montarlo en farolas donde el espacio es escaso.
Entry Line unmanaged Switche
ALLNET Switch industrial unmanaged Layer2 6 Port GbE ? 4x GbE ? 2x SFP ? Lüfterlos , IP40 ? ALL-SGI8104v2
Highlights:
ALLNET ALL-SGI8104v2 Industrial Switch is an unmanaged Gigabit Ethernet Switch that features
4-Port Gigabit RJ45 + 2-Port Gigabit SFP optical port, which is equipped with an IP40-rated rugged but compact-size case for stable operation in heavy industrial demanding environments. Being able to operate under the temperature ranging from -40? to +75?. It provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.
|
Model
|
ALL-SGI8104v2
|
Copper Ports
|
4-10/100/1000BASE-T RJ45 auto-sensing ports
|
Fiber Ports
|
2-1000BASE-T uplink SFP fiber slot ports
|
Switch Architecture
|
Store-and-Forward
|
Switch Fabric
|
12Gbps/non-blocking
|
Throughput
|
8.928Mpps @64 bytes
|
Share Data Buffer
|
2 Mb
|
Jumbo Frame
|
9216 Bytes
|
Flash Memory
|
8Mb
|
Flow Control
|
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|
Reset Button
|
>2 sec.: Factory default and reset
|
Power Supply
|
12V~57V DC, 50/60Hz,Dual DC
|
LED Indicators
|
Power: Green
Solid on- power work normal, off- power disconnected
System: Green
Blink-work normally, solid on- soft work abnormal, fast blink- soft upgrade 10/100/1000T RJ45 Interfaces (Port 1 to Port 4): 1000 LNK/ACT (Green),
10/100 LNK/ACT (yellow)
Blink- port connected with data transmission; Solid on- port connected without data transmission
1000Mbps SFP Interfaces (Port 5 to Port 6): Green
Blink- port connected with data transmission; Solid on- port connected without data transmission
|
DIP Switch
|
DIP switches for operating modes:
VLAN - Isolation of the main ports. Can exchange data only with SFP uplinks;
250m - on / off data transfer (10Mbps) in 250m
100 SFP - enable / disable the 100M speed of SFP ports
|
EMC
|
Surge Immunity:6KV Per: IEC61000-4-5
ESD Protection: ESD Level 4 Per: IEC61000-4-2;EFT Level 4 Per: IEC61000-4-4
|
Dimension
|
118.5*100*30mm
|
Weight
|
0.35kg
|
Working
Temperature
|
-40°C to 75°C
|
Storage
Temperature
|
'40? to 80 ?
|
MTBF
|
50,000hrs
|
Back
Entry Line smart managed Switche
Differences between Professional Line and Entry Line
La Línea Profesional ofrece las siguientes opciones exclusivas
- Certificación parcial según la norma EN60068-2-6 Vibración
- Certificación parcial según la norma EN60068-2-27 Choque
- Certificación parcial según la norma EN60068-2-32 Caja libre
- Certificación parcial según EN 50155/EN50121-3 Ferrocarril, EN50155/EN50121-4 Ferrocarril
- Relés de alarma parciales que se activan cuando falla una fuente de alimentación
- Conmutación parcial de protección del anillo Ethernet ERPSv2
Professional Line
Switches exterior
Para aplicaciones especiales de exterior ofrecemos interruptores de exterior IP67 con PoE.
Características especiales:
- Carcasa metálica sin ventilador con disipación de calor optimizada
- Rango de temperatura extendido desde -40° ~ +75
- Clase de protección IP67 con carcasa metálica impermeable
- Protección contra sobretensiones con 6KV (10/700us)
- PoE según IEEE802.3at (30W) y IEEE802.3af (15.4W)
- Pasó las pruebas: IEC60068-2-6 (Vibración) / IEC60068-2-27 (Impacto) / IEC60068-2-32 (Caída libre)