ALLNET Switch full managed 24 Port Gigabit 370W / 24x PoE+ / 4x SFP+ 10G / 19" / "ALL-SG8628PM-10G"

Highlights:

•  24 port Gigabit Layer2+ switch architecture (ports 1~24).
•  4 ports SFP+ 10G slots for optional GBICSs compatible (ports 25~28)
•  Supports various PoE management functions, including PoE shedule, PoE PD alive, etc.
•  Supports SFP DDM & cable diagnostics
•  Supports G.8032 ERPS, self-detection time < 20 ms
•  Supports 1588 V2.0, transparent clock
•  Supports port aggregation
•  4KV surge protection, 6KV contact/8KV air ESD protection
•  Max. 370W PoE budget
•  19" angle or wall/table mounting possible

ALL-SG8628PM-10G is a L2+ managed switch with 24 gigabit Ethernet ports and 4 1G/10G dual speed SFP ports. The 24 Ethernet ports supports IEEE802.3.af/at PoE output, can work with PoE PD devices like IP cameras, wireless AP, doorbell etc. With Rich L2+ management function, it is easy to set up to meet the projects technical requirements. It is an ideal solution for CCTV surveillance, wireless coverage and other SMB applications.

Rich PoE Management function

• PoE PD-alive check
• Scheduled power rebooting
• PoE schedule
• PoE usage monitoring
• Soft-reboot PoE Non-stop
• PoE port power feeding priority

10Gbps Uplink Capacity for Big Bandwidth Application

10G Ethernet is a big leap in the evolution of Ethernet. The 10G SFP+ slots supports dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. It is a cost-effective solution for SMB network to achieve the maximum performance of the 10G networks

Solution for IPv6 Networking

With the IPv6/IPv4 dual stack and other management functions, the ALL-SG8628PM-10G is the best choice for IP CCTV surveillance, VoIP and wireless solution providers to develop the IPv6 network. Meanwhile they help the SMBs to upgrade their network infrastructures to the IPv6 era without any extra investment.

Robust Layer 2 Features

The ALL-SG8628PM-10G can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS, IGMP/MLD snooping etc. The ALL-SG8628PM-10G allows the operation of a high-speed trunk combining multiple ports.

Powerful Security Functions

The ALL-SG8628PM-10G provides a comprehensive access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises?802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.

Enhanced Security and Traffic Control

The ALL-SG8628PM-10Gsupports DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.

User-friendly Secure Management

For efficient management, ALL-SG8628PM-10G managed switch series is equipped with console, web and SNMP management interfaces. With management interface, ALL-SG8628PM-10G offers an easy-to-use, platform independent management and configuration facility. The ALL-SG8628PM-10G supports SNMP and it can be managed via any management software based on the standard SNMP v1 or v2 Protocol. Meanwhile the ALL-SG8628PM-10G offers Cisco-like command via Telnet or console port and customer doesn?t need to learn new command from these switches. Moreover, the ALL-SG8628PM-10G offers the remotely secure management by supporting SSH,SSL and SNMP v3 connection where the packet content can be encrypted at each session.

Intelligent SFP DDM Function

The ALL-SG8628PM-10G support SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Smart PoE PD-Alive Check

ALL-SG8628PM-10G managed PoE switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8628PM-10G will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD?s power source and reducing administrator management burden.

PoE Schedule Function for Energy Saving

For environmental protection purpose, the ALL-SG8628PM-10G switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.

Scheduled PD Re-starting

The ALL-SG8628PM-10G smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.

1588 Time Protocol for Industrial Computing Networks

The ALL-SG8628PM-10G is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.

Technische Daten: