ALLNET Switch 52x Gigabit 400W full managed / 48x PoE+ / 4x SFP+ 10G / 19" / "ALL-SG8652PM-10G"
Destacados:- 48 ports Gigabit Layer2+ switch architecture (ports 1~48).
- 4 ports SFP+ 10G slots compatible for optional GBICSs (ports 48~52).
- Supports various PoE management functions,
- Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.
- Support spanning tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s).
- Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
- Support cable diagnosis and SFP DDM.
- Support PoE management, like PoE schedule, PoE PD-alive.
- Support G.8032 quick ring protocol. Self-recovery time <20ms.
- Support IEEE1588 v2, transparent clock(TC)
- Support DDM, SFP digital diagnostics monitoring
- Support IPV4 and IPV6 static routing functions
- Support memory and CPU monitoring
- 4KV surge protection, 6KV contact/8KV air protection
- Max. 400W PoE-Budget
- 19" angle or wall/table mounting possible
ALLNET ALL-SG8652PM-10G is a Layer 2+ managed Gigabit PoE Switch that features intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 management and built-in L2+ Gigabit Switching engine along with 48*10/100/1000BASE-Tports featuring 30-watt 802.3at PoE+ and 4*10G SFP+ fiber slots. With a total power budget up to 400W for different kinds of PoE applications, can provides quick, safe and cost-effective Power over Ethernet network solutions to security IP surveillance for small businesses and enterprises.
The ALL-SG8652PM-10G is programmed for advanced switch management functions such as 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.
Rich PoE Management Function
Being the managed PoE switches for CCTV surveillance, wireless and VoIP networks, ALL-SG8652PM-10G features the following special PoE management functions: - PoE PD-alive check
- Scheduled power rebooting
- PoE schedule
- PoE usage monitoring
- Soft-reboot PoE Non-stop
- PoE port power feeding priority
Smart PoE PD-Alive Check
ALL-SG8652PM-10G can be configured to monitor connected PD status in real time. Once the PD stops working and responding, the PoE switch will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD?s power source and reducing administrator management burden.
Scheduled Power Rebooting
ALL-SG8652PM-10G allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, they will reduce the chance of IP camera or AP crash resulting from buffer overflow.
PoE Schedule for Energy Saving
For energy saving and environmental protection purpose, ALL-SG8652PM-10Gcan effectively control the power supply besides their capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
PoE Usage Monitoring
Via web interface, ALL-SG8652PM-10G enables the administrator to monitor the status of the power usage of each connected PD in real time. Thus, they greatly enhance the management efficiency of the facilities.
10Gbps Uplink Capacity for Big Bandwidth Application
10G Ethernet is a big leap in the evolution of Ethernet. The 10G SFP+ slots support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. It is a cost-effective solution for SMB network to achieve the maximum performance of the 10G networks
Solution for IPv6 Networking
With the IPv6/IPv4 dual stack and other management functions, the ALL-SG86xxPM-10G series is the best choice for IP CCTV surveillance, VoIP and wireless solution providers to develop the IPv6 network. Meanwhile they help the SMBs to upgrade their network infrastructures to the IPv6 era without any extra investment.
Robust Layer 2 Features
ALL-SG8652PM-10G can be programmed for advanced switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS IGMP/MLD snooping etc. The ALL-SG86xxPM-10G series allows the operation of a high-speed trunk combining multiple ports.
Powerful Security Functions
ALL-SG8652PM-10G provides a comprehensive access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.
Enhanced Security and Traffic Control
ALL-SG8652PM-10G supports DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.
User-friendly Secure Management
For efficient management, ALL-SG8652PM-10G is a managed PoE switch,which is equipped with console, web and SNMP management interfaces. With management interface, ALL-SG8652PM-10G offers an easy-to-use, platform independent management and configuration facility. ALL-SG8652PM-10G supports SNMP and it can be managed via any management software based on the standard SNMP v1 or v2 Protocol. Meanwhile ALL-SG8652PM-10G offers Cisco-like command via Telnet or console port and customer doesn?t need to learn new command from these switches. Moreover, ALL-SG8652PM-10G offers the remotely secure management by supporting SSH, SSL and SNMP v3 connection where the packet content can be encrypted at each session.
Intelligent SFP DDM Function
ALL-SG8652PM-10G supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Technical Details:
Model
|
ALL-SG8652PM-10G
|
Copper Ports
|
48-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
|
Fiber Ports
|
4x1G/10GBASE-X SFP interfaces, supports 1G/10Gbps dual mode
|
PoE Ports
|
1~48-802.3af/802.3at PoE Injector Ports
|
Console Ports
|
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
|
Switch Architecture
|
Store-and-Forward
|
Switch Fabric
|
176 Gbps/non-blocking
|
Throughput
|
130.94Mpps @64 bytes
|
Address Table
|
32K entries
|
Share Data Buffer
|
32Mb
|
Jumbo Frame
|
9600 Bytes
|
SDRAM
|
2Gb
|
Flash Memory
|
128Mb
|
Flow Control
|
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|
Reset Button
|
>2 sec.: Factory default and reset
|
Power Supply
|
100~240V AC, 50/60Hz, 4A (max.)
|
Power Consumption
|
Max. 370 watts
|
PoE Standards
|
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
|
PoE Power Supply Type
|
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
|
LED Indicators
|
Power: Green
Solid on- power work normal, off- power disconnected
System: Green
Blink-work normally, solid on- soft work abnormal, fast Blink - soft upgra
de
PoE: Yellow
Solid on- PoE work normally, Off- PoE doesn?t work, Blink - PoE overload
10/100/1000T RJ45 Interfaces (Port 1 to Port 48): 1000 LNK/ACT (Green)
Blink - port connected with data transmission; Solid on- port connected
without data transmission
1G/10G SFP Interfaces (Port 25 to Port 28): Blue
Blink - port connected with data transmission; Solid on- port connected
without data transmission
|
EMC
|
Surge Immunity:
4KV Per: IEC61000-4-5
ESD Protection:
ESD Level 4 Per: IEC61000-4-2
EFT Level 4 Per: IEC61000-4-4
|
Layer2 Functions |
Port configuration
|
Auto-negotiation
Flow Control
Port Mirror: TX/RX/BOTH; Many-to-1 monitor
CPU Mirror
Traffic statistics
|
Link Aggregation
|
Static link aggregation
LACP (Dynamic Trunk/Static Trunk)
Algorith based on Source/Destination MAC
Algorithm based on Source/Destination IP
|
MAC Table
|
Aging Time
Static MAC address
Dynamic MAC address management
|
VLAN
|
4094 Active VLANs
4094 VID
802.1Q Tag VLAN
Port VLAN
Protocol VLAN
MAC VLAN
Voice VLAN
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
GARP/GVRP
|
ACL
|
512ACLs
L2, L3 e L4
Time-based ACL
IP ACL
MAC ACL
MAC-IP ACL
User-Defined ACL
ICMPv6
|
Spanning tree
|
802.1D Spanning Tree Protocol (STP)
802.1w Rapid Spanning Tree Protocol (RSTP)
802.1s Multiple Spanning Tree Protocol (MSTP)
Loop Guard
Root Guard
TC-BPDU Guard
BPDU Guard
BPDU Filter
|
Ring Protection |
<20ms G.8032 ERPS Ring
Fast Ring
|
Multicast |
1024 groups
IGMP v1/v2/v3 Snooping, Fast Leave
MLD Snooping
Multicast VLAN
IGMP filter
MVR
Multicast Routing
|
QOS
|
8 mapping IDs to 8 level priority queues
CoS port-based
CoS 802.1p-based
CoS DSCP-based
Scheduling algorithms SP, WRR, SP+WRR
Storm Control (Broadcast, Multicast, Unknown Unicast)
Bandwidth control per port
SWRR, DWRR for Scheduling
Flow Redirect
Precedence
TOS
Rate Limiting(Ingress/Egress)
Stri Priority
|
Security Features
|
Port Security
MAC address filter
ARP Association (Manual, ARP scanning, DHCP snooping)
ARP Protection
AAA
DAI
DoS (Denial of Service)
Classification of packages based on: End.MAC, IP End, TCP / UDP Ports,
Protocol Type;
802.1x Authentication (port-based e MAC-based)
TACACS/TACACS+ Authentication
RADIUS Authentication
DHCP Filter
Guest VLAN
SSLv2/SSLv3/TLSv1
SSHv1/SSHv2
Restriction of WEB access based on: IP Address, And. MAC and Port;
Port Isolation
Loopback detection
|
Management
|
SNMP v1/v2c/v3 with Full Private MIBs
RMON 4 groups
WEB (HTTP/HTTPS)
CLI (Telnet, Console, SSHv1/v2)
Firmware upgrade via console/web/TFTP
Configuration Backup/Reload
Dual Firmware
LLDP
Configuration Export/Import
CDP Aware
OAM (IEEE802.3ah)
CFM (IEEE802.1ag)
sFlow
Telnet
|
Synchronization, IEEE1588
|
Support IEEE1588v2 transparent clock
|
Other Features
|
DNS Client
DHCP Relay
DHCP Client
DHCP Snooping
DHCP Option 66
DHCP Option 67
DHCP Option 82
NTP/SNTP Client
UPNP
UDLD
|
PoE management
|
Total PoE power budget control
Per port PoE function enable/disable
PoE admin-mode control
PoE port power feeding priority
Per PoE port power limitation
PD classification detection
PD alive check
PoE schedule
Soft-reboot PoE Non-stop |
Maintenance
|
Cable Diagnostics
Ping
SFP DDM (Digital Diagnostics Monitoring)
Thermal protection
System log (Local and Remote)
Memory and CPU Monitoring
Tracert/ tracert 6
|
Layer 3 functions |
Static Routing
|
IPv4 Unicast: Static Routing(Software Base)
IPv6 Unicast: Static Routing(Software Base)
|
IPV6
|
IPv6 neighbor discovery (ND)
Path maximum transmission unit (MTU) discovery
Internet Control Message Protocol (ICMP) version 6
TCPv6/UDPv6
Ping6
Telnet(v6)
Http/Https
Interface IPV6
ACL IPV6 |
Dimension
|
440x290x44.5 mm
|
Weight
|
4.5 kg
|
Working Temperature
|
-10 °C to 45 °C
|
Storage Temperature
|
-20 °C to 70 °C
|
MTBF
|
50,000hrs
|
|
| | ALLNET Switch Modul ALL4750 Mini-GBIC Modul,1000Mbit,SX/LC, | | | ALLNET Switch Modul ALL4753 Mini-GBIC Modul,1000Mbit, EX/LC, 40KM | | | ALLNET Switch Modul ALL4755 Mini-GBIC Modul,1000Mbit, ZX/LC, 70-80KM | | | ALLNET Switch Modul ALL4751 Mini-GBIC Modul,1000Mbit,LX/LC, 10Km | | | Patchkabel RJ45 FTP(F/UTP) 0.25m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 0.5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 1.0m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 2m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 3m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 7.5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 10m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45, 0.25m grau, CAT5e, S-FTP(SF/UTP), Synergy | | | Patchkabel RJ45, 0.5m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 1.0m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 2m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 3m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 5m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 7.5m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 10m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 15m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 0.25m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 0.5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 1.0m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 2m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 3m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 7.5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz,10m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz,15m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | ALLNET ALL4757 / Switch Modul SFP+(Mini-GBIC), 10Gbit, SR/LC, | | | ALLNET Switch Modul ALL4758 SFP+(Mini-GBIC), 10Gbit Singlemode, LR/LC, bis 20Km | | | ALLNET Switch Modul ALL4752 SFP(Mini-GBIC), 1000Mbit, LHX/LC, 20KM, | | | ALLNET Switch Modul ALL4763 SFP+(Mini-GBIC), 10Gbit, B(Bidi)A/LC, Tx1270nm/Rx1330nm, 9u, 20Km, | | | ALLNET Switch Modul ALL4764 SFP+(Mini-GBIC), 10Gbit, B(Bidi)B/LC, Tx1330nm/Rx1270nm, 9u, 20Km, | | | ALLNET Switch Modul ALL4756 SFP(Mini-GBIC), 1000Mbit, EZX/LC,120KM | | | ALLNET Switch Modul ALL4767 SFP+(Mini-GBIC), 10Gbit, RJ45(TP), uncodiert | | | TP(RJ45) POE-Tester, at/af, Endspan/Midspan, standard, Synergy 21, | | | ALLNET Switch Zubehör smart managed 24 Port Gigabit PoE AT Ersatzlüfter ALL-SG8428PM | | | ALLNET Switch Modul ALL4757-INDU SFP+(Mini-GBIC), 10Gbit Multimode, SR/LC, Industrial -40/+85 Grad, | | | ALLNET Switch Modul ALL4758-INDU SFP+(Mini-GBIC), 10Gbit Singlemode, LR/LC, Industrial -40 -+85Grad, DDM, bis 20Km | | | ALLNET Switch Modul ALL4768 SFP+(Mini-GBIC), 10Gbit Singlemode, ER/LC, bis 40Km | | | ALLNET Switch Modul ALL4769 SFP+(Mini-GBIC), 10Gbit Singlemode, ZR/LC, bis 80Km | | | ALLNET Switch Modul ALL4767-INDU SFP+(Mini-GBIC), 10Gbit, RJ45(TP), uncodiert, Industrial -40/+85 Grad, |
Downloads Back |