Tel.: +49 (0)89 / 89422222
Por favor, seleccione su pais:
Elija un idioma
We are a developer and manufacturer of advanced networking and communications technology. Our innovative networking, storage, security and home automation products are designed in our own laboratories and distributed in many European countries.

Conversores de medio

Los conversores de medios PoE de ALLNET permiten una mayor flexibilidad a la hora de expandir de su red. Cuando se conecta a un cable de fibra óptica el conversor pasa PoE, así se pueden conectar otros dispositivos tales como puntos de acceso inalámbricos, teléfonos VoIP o cámaras IP a la red, sin necesidad de fuente de alimentación.

Conversores de medio PoE


 
pdf-download 134036-1  Art. nr. 134036

> Zum Online Shop

Highlights:

  • 60 Watts, selectable Mode A and Mode B
  • Industrial Gigabit POE Injector with voltage booster
  • accept 24 VDC to boost up voltage to 55V for 60Watts application
  • 1x10/100/1000M TX PSE (802.3af/at POE+) TX
  • 1x10/100/1000M TX
  • Operating temp: -40°C to +75°C

 

Introduction

 

This Super Voltage Booster --- 60 Watts, high power Single port industrial POE Injector is equipped with our high efficiency ColdDesign technology which allows low input voltage, such as 24/48/56 VDC be boost up to 55VDC to provide 60Watts to 72 Watts power to your security equipment by a 4-pin selectable dip switch. The ColdDesign technology will not only boost up Input Voltage, also reduce the excessive heat problem to a minimum. It accepts the input voltage as low as 24/48 VDC to boost up to 55V to meet IEEE802.3af/at required voltage. This built-in 4 pin dip switches are able to select POE for Mode B or Mode A, to select standard IEEE802.3at 30Watts or high power 36Watts, and to select 2 pair or 4 pair for 30/36Watts or 60/72Watts power output. It is being rigorously tested for your Security, Transportation and Telco application.

 

Technical Details:

 

IEEE Standard

 

 

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet

 

IEEE802.3af for POE

 

IEEE802.3at for POE+

 

 

Network Connector :

 

 

1xRJ-45 10/100/1000BaseT(X) Data

 

1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power

 

 

Network Cable

 

 

UTP/STP Cat.5e or above Cable

 

 

EIA/TIA-568 10-ohm (100m)

 

 

Protocol

 

 

CSMA/CD

 

 

LED

 

 

PW1(power 1) Green: ON- power good, OFF-power failed

 

PW2(power 2) Green: ON- power good, OFF-power failed

 

Mode A : ON-  End Span PD detected

 

Mode B: ON ? Mid Span PD detected

 

4 Pair: ON ? 60W PSE in active mode.

 

            OFF ? 30W PSE in active mode.

 

 

POE Pin Assignment

 

 

Default: Mode A (End Span) V+, V+, V-, V- for pin 1, 2, 3, 6

 

DIP switch setting can be changed to Mode B, V+, V+, V-, V- for pin 4, 5, 7, 8

 

 

DIP Switch

 

 

To select 2 pair (30/36Watts) or 4 pair (60/72Watts)

 

To select Mode A, or Mode B

 

To select standard IEEE802.3at 30watts or high power POE 36Watts

 

 

Reverse polarity protection

 

 

Present

 

 

Overload current protection

 

 

Present

 

 

Power Supply

 

 

2 Redundant power source

 

24V-56V VDC Power Input,

 

 

Power Consumption

 

 

1 W@24/48 VDC full load, Without POE

 

 

POE power

 

 

Maximum POE power 72watts at 24/48VDC input

 

 

Removable Terminal Block

 

 

Provide 4 pin terminal block

 

Wire range: 0.34mm^2 to 2.5mm^2

 

Solid wire (AWG):12-24/14-22

 

Stranded wire(AWG): 12-24/14-22

 

Torque:5lb-In/0.5Nm/0.56Nm

 

Wire Strip length: 7-8mm

 

 

Operating Temperature

 

 

-40° ~ 75° fully tested.

 

 

Operating Humidity

 

 

5% to 95% (Non-condensing)

 

 

Storage Temperature

 

 

-40°~85°

 

 

MTBF (mean time between failure)

 

 

510,304 hrs ( MIL-HDBK-217F) at 25°C

 

 

Housing

 

 

Rugged Metal, IP30 Protection

 

 

Case Dimension (L X W X D)mm

 

 

103.5mmx32mmx81.5mm (LxWxD)

 

 

Installation mounting

 

 

DIN Rail mounting and Wall Mounting

 

 

 

 

Certifications:

 

 

EN55022/24

 

 

ITE equipment

 

 

EN55011

 

 

Industrial, Scientific and Medical (ISM) equipment

 

 

Safety

 

 

IEC EN60950-1

 

 

EMC/EMS 

 

 

CE, FCC, VCCI

 

 

EMI

 

 

FCC Part 15 Subpart B Class A,

CE EN 55022 Class A

 

 

EN 50155 / EN 60068-2-6

 

 

Vibration

 

 

EN 50155 / EN 60068-2-27

 

 

Shock

 

 

EN 50155 / EN 60068-2-32

 

 

Free Fall

 

Accessory

 Article NoProductname
Mean Well Netzteil - 48V 75W Hutschiene, schmal
Mean Well Netzteil - 48V 240W Hutschiene
Mean Well Netzteil - 48V 120W Hutschiene, schmal
Mean Well Netzteil - 48V 480W Hutschiene
ALLNET 19"zbh. Gerätehalter für Hutschiene/DIN-Rail Geräte, T150mm/5HE, Lichtgrau, Frontmontage,
ALLNET DIN-RAIL Wandgehäuse, T223mm, Lichtgrau, IP55, SO-DIN-Serie,
ALLNET 19"Wandgehäuse, 6HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit
ALLNET 19"Wandgehäuse, 9HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit
ALLNET 19"Wandgehäuse, 12HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit


Downloads



Back