Highlights:-
Hardened 60W Gigabit POE converter
-
designed with hardened Marvell IC
-
1x10/100/1000M 60W PSE (supports 802.3af/at) TX + 100/1000M SFP
-
48-56VDC Redundant Power-Input
-
Operating temp: -40°C to +75°C
This Rugged 60 Watts Industrial POE converter is designed with hardened Marvell IC, it delivers 60Watts POE power to your PD. It also can tolerate extreme temperature in a harsh environment. Our ColdDesign technology will not only power up your PD device, also reduce the excessive heat problem to a minimum. It accepts the input voltage from 48VDC to 56VDC to meet IEEE802.3af/at required voltage. It is being rigorously tested for your Security, Transportation and Telco application.
Technical Detail:
Element
|
Specification
|
Standards:
|
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Flow Control Back Pressure
IEEE802.af for PoE
IEEE802.3at for PoE+
|
Network Connections:
|
1x 10/100/1000BaseT (RJ-45)
1x 1000BaseSX/LX SFP Module Slot
|
Data Processing:
|
Half/Full-Duplex on TP
|
PoE:
|
IEEE802.3at/af compatile
|
Flow Control: |
IEEE802.3x Flow Control and Back Pressure |
Jumbo Frame |
9KB |
Packet Buffer Size |
1M |
MAC adress Table Size |
2K |
Network Cable:
|
TP:10/100/1000BaseT Cat. 5, 5E, 6 UTP/STP, till 100 m
1000BaseSX:
62.5/125?m Multi Mode LWL, till 220 m
50/125?m Multi Mode LWL, till 550 m
1000BaseLX:
9/125?m Single Mode LWL
|
POE Pin Assignment: |
60 watts 4 pairs
V+, V+, V-, V- for pin 1, 2, 3, 6
V+, V+, V-, V- for pin 4, 5, 7, 8 |
DIP Switch: |
To select SFP speed 100M or 1000M. |
Reverse polarity protection: |
Present |
Overload current protection: |
Present |
LED:
|
PW1(power 1) Green: ON- power good, OFF-power failed
UTP LEDS: Amber ON- PD detected, Green ON ? Link/active
SFP LED: Green ON ? SFP detected
|
Power Supply:
|
4pin Terminal Block 48V-56V VDC Power Input
SW (Relay): Relay switch for alarm
|
Power Consumption: |
2W@48VDC without PoE |
PoE Power: |
Maximum PoE Power 72W at 56VDC Input |
Alarm Relay Contact: |
Relay outputs with current carrying capacity of 1 A @24VDC,
Relay in short circuit mode when power fails. in open circuit mode when power supply is connected |
Removable Terminal Block: |
Provide 4 pin terminal block
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm |
Case Dimension (L X W X D)mm
|
103.5mmx32mmx81.5mm (LxWxD) |
Installation mounting: |
DIN Rail mounting and Wall Mounting |
Housing: |
Rugged Metal, IP30 Protection |
MTBF ( mean time between failure) |
510,304 hrs ( MIL-HDBK-217F) at 25°C |
Environment:
|
Operating Temperature: -40° ~ +75° °C
Operating Humidity: 5% ~ 95% (non condensing)
Storage Temperature: -40 ~ 85 °C
Storage Humidity: 5% ~ 95% (non condensing)
|
Marks:
|
CE, FCC, VCCI
EN55022 Class A
EN55022/24 ITE Equipment
EN55011 Industrial, Scientific and Medical (ISM) equipment
IEC EN60950-1 Sicherheit
|
Shock:
|
EN50155 / EN 60068-2-27
|
Free Fall:
|
EN5055 / EN 60068-2-32
|
Vibration: |
EN 50155 / IEC 60068-2-6 |
EMI: |
FCC Part 15 Supbart B Class A
CE EN 55022 Class A |
|
| | ALLNET ALL-B100-24VDC / Power-Booster 24VDC to 48~55VDC max. 95W HUT/DIN-Mounting | | | ALLNET Switch Modul ALL4750-INDU SFP(Mini-GBIC), 1000Mbit, SX/LC, Industrial -40/+85 Grad, | | | ALLNET Switch Modul ALL4751-INDU SFP(Mini-GBIC), 1000Mbit, LX/LC, 10Km, Industrial, -40/+85 Grad, | | | Mean Well Netzteil - 48V 240W Hutschiene | | | Mean Well Netzteil - 48V 75W Hutschiene, schmal | | | Mean Well Netzteil - 48V 120W Hutschiene, schmal | | | Mean Well Netzteil - 48V 480W Hutschiene | | | ALLNET 19"zbh. Gerätehalter für Hutschiene/DIN-Rail Geräte, T150mm/5HE, Lichtgrau, Frontmontage, | | | ALLNET Switch Modul ALL4794-INDU SFP(Mini-GBIC), 100Mbit, FX/LC, 10Km, singlemode, Industrial -40/+85 Grad, | | | ALLNET DIN-RAIL Wandgehäuse, T223mm, Lichtgrau, IP55, SO-DIN-Serie, | | | ALLNET 19"Wandgehäuse, 6HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit | | | ALLNET 19"Wandgehäuse, 9HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit | | | ALLNET 19"Wandgehäuse, 12HE, T488mm, Lichtgrau, IP55, SO-Serie, incl. 2-Fach Lüftereinheit | | | ALLNET Switch Modul ALL4796 SFP(Mini-GBIC), 100Mbit, FX/LC, 2Km, Multi Mode, | | | ALLNET Switch Modul ALL4752-INDU SFP(Mini-GBIC), 1000Mbit, LHX/LC, 20KM, Industrial, -40/+85 Grad, |
Downloads Back |