Switches Industriales para el carril DIN
La diferencia entre Switches industriales y normales es su forma de instalación, que normalmente se montan en un carril DIN. Además, los Switches industriales tienen rangos de temperatura ampliados y entradas de alimentación redundantes. Esto significa que puede alimentar su Switch con una fuente de almientación y un conector Phoenix. Además su diseño es más pequeño para p.ej. montarlo en farolas donde el espacio es escaso.
Entry Line unmanaged Switche
Entry Line smart managed Switche
Differences between Professional Line and Entry Line
La Línea Profesional ofrece las siguientes opciones exclusivas
- Certificación parcial según la norma EN60068-2-6 Vibración
- Certificación parcial según la norma EN60068-2-27 Choque
- Certificación parcial según la norma EN60068-2-32 Caja libre
- Certificación parcial según EN 50155/EN50121-3 Ferrocarril, EN50155/EN50121-4 Ferrocarril
- Relés de alarma parciales que se activan cuando falla una fuente de alimentación
- Conmutación parcial de protección del anillo Ethernet ERPSv2
Professional Line
Fanless 4-port Gigabit full managed industrial PoE Layer 2+ Ethernet switch compliant with IEEE802.3at
|
Model |
ALL-SGI8104v2PM |
Copper Ports |
4-10/100/1000BASE-T RJ45 auto-sensing ports |
Fiber Ports |
2-100/1000BASE-T SFP interfaces, supports 100/1000Mbps dual mode |
PoE Ports |
4-802.3af/802.3at PoE Injector Ports |
Console Ports |
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
12Gbps/non-blocking |
Throughput |
8.928Mpps @64 bytes |
Address Table |
8K entries |
Share Data Buffer |
4.1 Mb |
Jumbo Frame |
9216 Bytes |
SDRAM |
1Gb |
Flash Memory |
128Mb |
Flow Control |
IEEE 802.3x pause frame for full-duplex ; Back pressure for half-duplex |
Reset Button |
>2 sec.: Factory default and reset |
Power Supply |
48 ~ 57 VDC, 50/60Hz,Dual DC for PoE support 12VDC ~ 48VDC for non PoE support |
PoE Standards |
IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE
|
PoE Power Supply Type |
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
|
LED Indicators |
Power: Green Solid on?power work normal,off?power disconnected
System:Green
Blink?work normally, solid on?soft work abnormal, fast blink?soft upgrade
PoE: Yellow
Solid on?PoE work normally, Off?PoE doesn?t work, Blink?PoE overload
10/100/1000T RJ45 Interfaces (Port 1 to Port 4): 1000 LNK/ACT (Green),
Blink?port connected with data transmission;
Solid on?port connected without data transmission
100/1000Mbps SFP Interfaces (Port 5 to Port 6): Green
Blink- port connected with data transmission;
Solid on- port connected without data transmission
|
EMC |
Surge Immunity:6KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2;EFT Level 4 Per: IEC61000-4-4
|
Dimension |
145x112x47.2mm |
Weight |
0.6kg |
Working Temperature |
-40°C to 75°C |
Storage Temperature |
-40°C to 80°C |
Operation Humidity |
5% to 95%, non-condensing |
MTBF |
50,000hrs |
Layer 2 functions
Port configuration |
Auto-negotiation Flow Control
Port Mirror: TX/RX/BOTH; Many-to-1 monitor
CPU Mirror
Traffic statistics
|
Link Aggregation |
Static link aggregation LACP(Dynamic Trunk/Static Trunk)
Algorithm based on Source/Destination MAC
Algorithm based on Source/Destination IP
|
MAC Table |
Aging Time Static MAC address
Dynamic MAC address management
|
VLAN |
4094 Active VLANs 4094 VID
802.1Q Tag VLAN
Port VLAN
Protocol VLAN
MAC VLAN
Voice VLAN
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
GARP/GVRP
|
ACL |
256ACLs L2, L3 e L4
Time-based ACL
IP ACL
MAC ACL
MAC-IP ACL
User-Defined ACL
ICMPv6
|
Spanning tree |
802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP)
802.1s Multiple Spanning Tree Protocol (MSTP)
Loop Guard
Root Guard
TC-BPDU Guard
BPDU Guard
BPDU Filter
|
Ring Protection |
<20ms G.8032 ERPS Ring Fast Ring
ALLNET Ring, < 20ms
|
Multicast |
256 groups IGMP v1/v2/v3 Snooping, Fast Leave
MLD Snooping
Multicast VLAN
IGMP filter
MVR
Multicast Routing
|
QOS |
8 mapping IDs to 8 level priority queues CoS port-based
CoS 802.1p-based
CoS DSCP-based
Scheduling algorithms SP, WRR, SP+WRR
Storm Control (Broadcast, Multicast, Unknown Unicast)
Bandwidth control per port
SWRR, DWRR for Scheduling
Flow Redirect
Precedence
TOS
Rate Limiting(Ingress/Egress)
Stri Priority
|
Security Features |
Port Security MAC address filter
ARP Association (Manual, ARP scanning, DHCP snooping)
ARP Protection
AAA
DAI
DoS (Denial of Service)
Classification of packages based on: End.MAC, IP End, TCP / UDP Ports,
Protocol Type;
802.1x Authentication (port-based e MAC-based)
TACACS/TACACS+ Authentication
RADIUS Authentication
DHCP Filter
Guest VLAN
SSLv2/SSLv3/TLSv1
SSHv1/SSHv2
Restriction of WEB access based on: IP Address, And. MAC and Port;
Port Isolation
Loopback detection
|
Management |
SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups
WEB (HTTP/HTTPS)
CLI (Telnet, Console, SSHv1/v2)
Firmware upgrade via console/web/TFTP
Configuration Backup/Reload
Dual Firmware
LLDP
Configuration Export/Import
CDP Aware
OAM (IEEE802.3ah)
CFM (IEEE802.1ag)
sFlow
Telnet Client
|
Synchronization, IEEE1588
|
Support IEEE1588v2 transparent clock |
Other Features |
DNS Client DHCP Relay
DHCP Client
DHCP Snooping
DHCP Option 66
DHCP Option 67
DHCP Option 82
NTP/SNTP Client
UPNP
UDLD
|
PoE management |
Total PoE power budget control Per port PoE function enable/disable
PoE admin-mode control
PoE port power feeding priority
Per PoE port power limitation
PD classification detection
PD alive check
PoE schedule
Soft-reboot PoE Non-stop
|
Maintenance |
Cable Diagnostics Ping
SFP DDM (Digital Diagnostics Monitoring)
Thermal protection
System log (Local and Remote)
Memory and CPU Monitoring
Tracert/ Tracert 6
|
Layer 3 functions
Static Routing |
IPv4 Unicast: Static Routing (Software Base) IPv6 Unicast: Static Routing (Software Base)
|
IPV6 |
IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery
Internet Control Message Protocol (ICMP) version 6
TCPv6/UDPv6
Ping6
Telnet(v6)
Http/Https
Interface IPV6
ACL IPV6
|
Back
Switches exterior
Para aplicaciones especiales de exterior ofrecemos interruptores de exterior IP67 con PoE.
Características especiales:
- Carcasa metálica sin ventilador con disipación de calor optimizada
- Rango de temperatura extendido desde -40° ~ +75
- Clase de protección IP67 con carcasa metálica impermeable
- Protección contra sobretensiones con 6KV (10/700us)
- PoE según IEEE802.3at (30W) y IEEE802.3af (15.4W)
- Pasó las pruebas: IEC60068-2-6 (Vibración) / IEC60068-2-27 (Impacto) / IEC60068-2-32 (Caída libre)