ALLNET Switch full managed 12 Port Gigabit 130W / 8 x PoE / 4 x SFP+/ 4 x LAN / Layer 2+ / ALL-SG8412PM-10G- L2+ managed commercial PoE fiber switch is equiped with 12*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fiber slot ports.
- Port 1-8 can support IEEE 802.3af/at standard POE, single port POE power up to 30W.
- Port 9-12 can support 1GB Gigabit LAN
- Port 13-16 can support 1GB SFP Slots or 10GB SFP+ Slots
- Support various PoE management function, including PoE shedule, PoE PD-alive etc
- Support SFP DDM & cable diagnosis
- Support G.8032 ERPS, self-covery time < 20 ms
- Support 1588 V2.0, transparent clock
- Support port aggregation
- 4KV surge protection, 6KV contact/8KV air ESD protection
ALL-SG8412PM-10G is a L2+ managed commercial PoE fiber switch is equiped with 12*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fiber slot ports. Port 1-8 can support IEEE 802.3af/at standard POE, single port POE power up to 30W. With rich management function, such as QoS, VLAN, ACLs, spanning tree etc, ALL-SG8412PM-10G is an ideal choice for IP CCTV surveillance, wireless coverage, VoIP solutions.
Rich PoE Management Function
Being the managed PoE switches for CCTV surveillance, wireless and VoIP networks, ALL-SG8412PM-10G feature the following special PoE management functions: - PoE PD-alive check
- Scheduled power rebooting
- PoE schedule
- PoE usage monitoring
- Soft-reboot PoE Non-stop
- PoE port power feeding priority
Smart PoE PD-Alive Check
ALL-SG8412PM-10G can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8412PM-10G will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD?s power source and reducing administrator management burden.
Scheduled Power Rebooting
ALL-SG8412PM-10G allow each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, they will reduce the chance of IP camera or AP crash resulting from buffer overflow.
PoE Schedule for Energy Saving
For energy saving and environmental protection purpose, ALL-SG8412PM-10G can effectively control the power supply besides their capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
PoE Usage Monitoring
Via web interface, ALL-SG8412PM-10G enable the administrator to monitor the status of the power usage of each connected PD in real time. Thus, they greatly enhance the management efficiency of the facilities.
10Gbps Uplink Capacity for Big Bandwidth Application
10G Ethernet is a big leap in the evolution of Ethernet. The 10G SFP+ slots support dual-speed 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. It is a cost-effective solution for SMB network to achieve the maximum performance of the 10G networks
Solution for IPv6 Networking
With the IPv6/IPv4 dual stack and other management functions, ALL-SG8412PM-10G is the best choice for IP CCTV surveillance, VoIP and wireless solution providers to develop the IPv6 network. Meanwhile they help the SMBs to upgrade their network infrastructures to the IPv6 era without any extra investment.
Fast Recovery Redundant Ring for Critical Network Applications
The ALL-SG8412PM-10G supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer?s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms.
1588 Time Protocol for Industrial Computing Networks
The ALL-SG8412PM-10G is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
Intelligent SFP DDM Function
The ALL-SG8412PM-10G support SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Technical Details:Model |
ALL-SG8412PM-10G |
Copper Ports |
12-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
Fiber Ports |
4x1G/10GBASE-X SFP interfaces, supports 1G/10Gbps dual mode |
PoE Ports |
1~8-802.3af/802.3at PoE Injector Ports |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
104 Gbps/non-blocking |
Throughput |
77.38Mpps @64 bytes |
Address Table |
32K entries |
Share Data Buffer |
32 Mb |
Jumbo Frame |
9600 Bytes |
SDRAM |
2Gb |
Flash Memory |
128Mb |
Flow Control |
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|
Reset Button |
>2 sec.: Factory default and reset |
Power Supply |
100~240V AC, 50/60Hz, 4A (max.) |
Power Consumption |
Max.150 watts/1122 BTU |
PoE Standards |
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
|
PoE Power Supply Type |
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
|
LED Indicators |
Power: Green
Solid on- power work normal, off- power disconnected
System: Green
Blink -work normally, solid on- soft work abnormal, fast Blink ? soft upgrade
PoE: Yellow
Solid on- PoE work normally, Off- PoE doesn?t work, Blink ? PoE overload10/100/1000T RJ45 Interfaces(Port 1 to Port 12): 1000 LNK/ACT (Green)
Blink ? port connected with data transmission; Solid on- port connected without data transmission
1G/10G SFP Interfaces (Port 13 to Port 16): Blue
Blink- port connected with data transmission; Solid on- port connected without data transmission
|
EMC |
Surge Immunity: 4KV Per: IEC61000-4-5
ESD Protection:ESD Level 4 Per: IEC61000-4-2
EFT Level 4 Per: IEC61000-4-4
|
Dimension |
280x213x44.5mm |
Weight |
2.5kg |
Working Temperature |
-10 ?to 45? |
Storage Temperature |
-20? to 70 ? |
MTBF |
50,000hrs |
Layer 2 functionsPort configuration |
Auto-negotiation
Flow Control
Port Mirror: TX/RX/BOTH; Many-to-1 monitor
CPU Mirror
Traffic statistics
|
Link Aggregation |
Static link aggregation
LACP(Dynamic Trunk/Static Trunk)
Algorith based on Source/Destination MAC
Algorithm based on Source/Destination IP
|
MAC Table |
Aging Time
Static MAC address
Dynamic MAC address management
|
VLAN |
4094 Active VLANs
4094 VID
802.1Q Tag VLAN
Port VLAN
Protocol VLAN
MAC VLAN
Voice VLAN
802.1ad Q-in-Q tunneling
Private VLAN (Protected port)
GARP/GVRP
|
ACL |
512ACLs
L2, L3 e L4
Time-based ACL
IP ACL
MAC ACL
MAC-IP ACL
User-Defined ACL
ICMPv6
|
Spanning tree |
802.1D Spanning Tree Protocol (STP)
802.1w Rapid Spanning Tree Protocol (RSTP)
802.1s Multiple Spanning Tree Protocol (MSTP)
Loop Guard
Root Guard
TC-BPDU Guard
BPDU Guard
BPDU Filter
|
Ring Protection |
<20ms G.8032 ERPS Ring
Fast Ring
|
Multicast |
1024 groups
IGMP v1/v2/v3 Snooping, Fast Leave
MLD Snooping
Multicast VLAN
IGMP filter
MVR
Multicast Routing
|
QOS |
8 mapping IDs to 8 level priority queues
CoS port-based
CoS 802.1p-based
CoS DSCP-based
Scheduling algorithms SP, WRR, SP+WRR
Storm Control (Broadcast, Multicast, Unknown Unicast)
Bandwidth control per port
SWRR, DWRR for Scheduling
Flow Redirect
Precedence
TOS
Rate Limiting(Ingress/Egress)
Stri Priority
|
Security Features |
Port Security
MAC address filter
ARP Association (Manual, ARP scanning, DHCP snooping)
ARP Protection
AAA
DAI
DoS (Denial of Service)
Classification of packages based on: End.MAC, IP End, TCP / UDP Ports,
Protocol Type;
802.1x Authentication (port-based e MAC-based)
TACACS/TACACS+ Authentication
RADIUS Authentication
DHCP Filter
Guest VLAN
SSLv2/SSLv3/TLSv1
SSHv1/SSHv2
Restriction of WEB access based on: IP Address, And. MAC and Port;
Port Isolation
Loopback detection
|
Management |
SNMP v1/v2c/v3 with Full Private MIBs
RMON 4 groups
WEB (HTTP/HTTPS)
CLI (Telnet, Console, SSHv1/v2)
Firmware upgrade via console/web/TFTP
Configuration Backup/Reload
Dual Firmware
LLDP
Configuration Export/Import
CDP Aware
OAM (IEEE802.3ah)
CFM (IEEE802.1ag)
sFlow
Telnet client
|
Synchronization,
IEEE1588
|
Support IEEE1588v2 transparent clock |
Other Features |
DNS Client
DHCP Relay
DHCP Client
DHCP Snooping
DHCP Option 66
DHCP Option 67
DHCP Option 82
NTP/SNTP Client
UPNP
UDLD
|
PoE management |
Total PoE power budget control
Per port PoE function enable/disable
PoE admin-mode control
PoE port power feeding priority
Per PoE port power limitation
PD classification detection
PD alive check
PoE schedule
Soft-reboot PoE Non-stop
|
Maintenance |
Cable Diagnostics
Ping
SFP DDM (Digital Diagnostics Monitoring)
Thermal protection
System log (Local and Remote)
Memory and CPU Monitoring
Tracert/ Tracert 6
|
Layer 3 functionsStatic Routing |
IPv4 Unicast: Static Routing(Software Base)
IPv6 Unicast: Static Routing(Software Base)
|
IPV6 |
IPv6 neighbor discovery (ND)
Path maximum transmission unit (MTU) discovery
Internet Control Message Protocol (ICMP) version 6
TCPv6/UDPv6
Ping6
Telnet(v6)
Http/Https
Interface IPV6
ACL IPV6
|
|
| | ALLNET ALL4757 / Switch Modul SFP+(Mini-GBIC), 10Gbit, SR/LC, | | | ALLNET Switch Modul ALL4757-INDU SFP+(Mini-GBIC), 10Gbit Multimode, SR/LC, Industrial -40/+85 Grad, | | | ALLNET Switch Modul ALL4758 SFP+(Mini-GBIC), 10Gbit Singlemode, LR/LC, bis 20Km | | | ALLNET Switch Modul ALL4758-INDU SFP+(Mini-GBIC), 10Gbit Singlemode, LR/LC, Industrial -40 -+85Grad, DDM, bis 20Km | | | ALLNET Switch Modul ALL4760 SFP+(Mini-GBIC), 10Gbit Singlemode, bis 220m, LRM/LC, *nur für Multimode 50/125u Kabel OM1-4* | | | ALLNET Switch Modul ALL4767 SFP+(Mini-GBIC), 10Gbit, RJ45(TP), uncodiert | | | Patchkabel RJ45 FTP(F/UTP) 0.25m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 0.5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 1.0m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 2m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 3m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 7.5m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45 FTP(F/UTP) 10m grau, CAT5e, Synergy 21, | | | Patchkabel RJ45, 15m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 0.25m grau, CAT5e, S-FTP(SF/UTP), Synergy | | | Patchkabel RJ45, 0.5m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 1.0m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 2m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 3m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 5m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, 7.5m grau, CAT5e, S-FTP(SF/UTP), Synergy 2 | | | Patchkabel RJ45, 10m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 0.25m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 0.5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 1.0m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 2m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 3m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz, 7.5m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz,10m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | Patchkabel RJ45, CAT6 250Mhz,15m grau, S-STP(S/FTP), LSZH, Synergy 21, | | | TP(RJ45) POE-Tester, at/af, Endspan/Midspan, standard, Synergy 21, | | | ALLNET Switch Modul ALL4768 SFP+(Mini-GBIC), 10Gbit Singlemode, ER/LC, bis 40Km | | | ALLNET Switch Modul ALL4769 SFP+(Mini-GBIC), 10Gbit Singlemode, ZR/LC, bis 80Km |
Downloads Back |