Tel.: +49 (0)89 / 89422222
Please choose your country:
Choose a language
We are a developer and manufacturer of advanced networking and communications technology. Our innovative networking, storage, security and home automation products are designed in our own laboratories and distributed in many European countries.
Contact

PoE Injectors

The ALLNET PoE injectors install your PoE-enabled IP devices such as wireless access Points, VoIP phones, IP Cam's and much more totally independent of existing electrical outlets.
You can select the appropriate injector to 15 watts, to 30 watts or 90 watts.

On output will be detected automatically in each case whether a PoE capable device is located.

Typical application:

 


ALLNET PoE Injektor Outdoor IEEE802.3bt (15,4W/30W/60W)
 
pdf-download 195544-1  Art. nr. 195544

> Zum Online Shop

Highlights:

  • 60 Watt PoE IP67 Outdoor Injector according to IEEE802.3bt Standard
  • IP67 weatherproof & IK10 shockproof for robust outdoor installations
  • 1x 10/100/1000M TX PoE output according to IEEE802.3af/at/bt 60W
  • 1x AC 100~240V input voltage on 2PIN terminal (AC connection cable must be installed by customer, thus flexible in installation)
  • Extended operating temperature: -20°C to +60°C

 

This product is a waterproof Gigabit Power over Ethernet (PoE) device for powering most common IP end devices. The injector is fully compliant with the IEEE 802.3af/at/bt standard. The device also complies with the IP67 protection class, which means it is weatherproof and can be used outdoors without any problems. Thanks to the IK10 standard, the injector is vibration-resistant, which ensures reliable and safe use, even in industrial environments. It transmits the required electrical energy and implements the data exchange via an RJ45 cable with a maximum transmission distance of 100 metres. The injector automatically detects which PoE standard is present at the end device on the output side and regulates the voltage automatically. The injector can supply a PoE end device at the output with a maximum power of 60W according to the IEEE802.3BT standard.

 

 

 

 

 

 

 

 

 

Technical Details:

 

 

 

Technical Details:

Model:

ALL-PI2013OBT60 - 60W waterproof PoE injector AC to BT 60W

 

IEEE Standard:

 

 

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE802.3af for POE

IEEE802.3at for POE+

IEEE802.3bt

 

 

Network Media (Cable):

 

10BASE-T: UTP category 3,4,5 cable (?100m) 

100BASE-TX: UTP category 5 cable (?100m) 

1000BASE-T: UTP category 5e cable (?100m)


Network Connector:

 

1xRJ-45 10/100/1000BaseT(X) Data

1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power IEEE802.3bt 60W

 

Input current:

 

 

1,5A Max

 


Power input:

AC 100-240V 50/60Hz 2 PIN Terminal


PoE Power output:

60W Max. IEEE802.3bt

 

POE Pin Assignment RJ45:

 

 

1/2(-), 3/6(+) and 4/5(+),7/8(-)

 


Output Voltage:

DC 55V±5%


Output ripple voltage:

?200mV,Test conditions: rated input voltage, full load output, Tested with 20MHz bandwidth oscilloscope, Parallel connected a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to the output


Output current:

1.1A Max.


LED Indicator:

PWR(Green) , PoE(Bt:Green,UPoE:orange)

 

Dimmension:

 

 

150 x 73 x 44mm

 

 

Operating Temperature:

 

 

-20°C ~ 60°C

 


Storage Temperature:

-40°C ~ 80°C


Surge Protection:

Difference Mode:±4KV, Common mode:±6KV


MTBF:

<50000 hours


Electrostatic standard:

 

Contact 6KV, air 8KV

 


Waterproof grade:

IP67


Anti-hazard classification:

IK10

Back