ALLNET Power over Ethernet Repeater
Power over Ethernet, easy extend up to 100m.
ALLNET offers 2 solutions for PoE repeaters. In the entry area the ALL-PR2012P-E which can be supplied with 30W with PoE IEEE802.3at and can be cascaded with max. 4 repeaters. The second solution is the PoE repeater ALLNET ALL048600, which extends the PoE and network range by 100m. Depending on the PoE input power, up to 6 repeaters can be connected in succession. For example, we recommend the ALLNET ALL048900 LT PoE injector for the output power.
Sample application diagram:
ALLNET Power over Ethernet IP68 Outdoor Repeater Entry Line - max. 500m

ALLNET Power over Ethernet IP68 Outdoor Repeater Entry Line - max. 500m
Highlights:
The new ALL-PR2013O-30W is a small 2-port PoE switch or PoE repeater and extends the PoE signal by 100 meters each. This length is normally the maximum distance for PoE supply from power and data. With the help of the repeater, up to 300 meters of PoE can be achieved if a new device is installed every 100 meters. This is only possible because it is an active device and the signal is always reprocessed. The repeater is fed with IEEE802.3bt and outputs IEEE802.3af/at PoE up to 70 watts. The certification for protection classes -IP67 makes the product suitable for outdoor use, as it is dustproof and protected against heavy splash water and short submersion. To give you a better idea of the concept of an outdoor repeater, here are some usage scenarios:
A BT power supply is required!!! e.g. 188381
Technical Details:
DownloadsBack |





