PoE Tablets
ARM PoE Tablet PCs with Android
All tablets have a multi-core CPU and have enough power to display videos and images, as well as to run all common app applications. The tablets are available in different sizes and equipment variants. Starting with the sizes 10,14,15.6 and 21 inch, there are also different board variants: Allwinner A64 or Rockchip RK3288. The special feature is the power supply via "PoE", which means you only need one cable for power and data supply. Tablets up to 15.6" inches can be supplied via standard "PoE af", the 21" inch display via "PoE at". The connections are on the back. Wall mounting is realized via the VESA 75x75 or 100x100mm mounting. The screen content can be rotated through 90°, 180° and 270° via the display settings. Each device comes with an additional stand and a power supply unit.
For your home or your next customer?
Here are some examples of the use of All-in-One Pcs and wall tablets:
- Digital signage
- Video door stations
- Digital door signage (occupancy of a room e.g. conference & meeting room)
- Photo or picture display (digital picture frame)
- Video explanation and invitation to buy in the retail trade
- Electronic posters
- Permanently installed customer satisfaction surveys in retail
- Home automation terminal
- Representation and contingency plans in educational institutions
- Patient information in clinics (e.g. menus, tablet intake, visits to the doctor)
- Interactive terminals in museums, zoos and other leisure venues
- Your next idea
Professional Tablets
Meeting Room Tablets
ALLNET Meeting Room LED Tablet 10 inch RK3288 Android 8/10 and RFID (NXP Mifare, Desfire)
Update to Android 10 possible: write to support@allnet.de
Including power supply and integrated snap-in wall mount with anti-theft protection. RGB LED for displaying e.g. warning signals, occupancy of meeting rooms etc.
Due to the NFC, time recording terminals can also be implemented very well or info terminals with ID, such as multi-party residential complexes.
Currently tested Android time terminal software:
PDS time works, but config file must be imported manually, camera we did not address. AIDA time works according to manufacturer with our part numbers 174715/174716/174717/174888 u. 182897
The API/SDK for NFC/RFID and LED are available on request.
Specifications NFC: NXP PN7150
PN7150 is a full-featured NFC controller solution with integrated firmware and NCI interface that for contactless communication on 13.56 MHz. It is compatible with the requirements of the NFC Forum. PN7150 was developed based on lessons learned from previous generations of NXP NFC devices. It is the ideal solution for quickly integrating NFC technology into any application, especially those using O/S environments such as Linux and Android.
- Full NFC forum compliance with small form factor antenna. - Embedded NFC firmware that provides all NFC protocols as a pre-integrated feature - Direct connection to main host or microcontroller, through physical I2C bus and NCI protocol - Ultra-low power consumption in polling loop mode - High efficiency integrated power management unit (PMU)
- Supported RF protocols - NFCIP-1, NFCIP-2 protocol (see [8] and [11]) - ISO/IEC 14443A, ISO/IEC 14443B PICC, NFC Forum T4T modes via host interface (see [3]) - NFC Forum T3T via host interface - ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP - FeliCa PCD mode - MIFARE PCD encryption mechanism (MIFARE Classic 1K/4K) - NFC Forum tag 1 to 5 (MIFARE Ultralight, Jewel, Open FeliCa tag, MIFARE DESFire) (see [1]) - ISO/IEC 15693/ICODE VCD mode (see [9])
For further information please refer to the NFC data sheet.
Back |