VDSL2 Master Modem for dedicated lines via 2-wire connections up to a
lenght of 2500 Meters and a bandwidth of 100 Mbit/s (depends on length). Supports DPBO (Downstream Power Back Off).
Advantage, in contrast to previous VDSL modems (ALL126AS/ALL126AS2):
Automatically detects the operation mode - either slave modem at the ALLNET master or as VDSL modem at
the provider (Deutsche Telekom, etc.)
The ALLNET ALL126AS3 is a VDSL2 Router that leverages the extraordinary bandwidth promise of VDSL2 (max. 100Mbps Symmetric) technology, the next step
in the delivery of new high-speed Internet applications to end-users in their homes or offices.
Quick, easy and economical to install and maintain, the ALL126AM2 works with the ALL126AS3 over existing copper wire infrastructure. ALL126AM2 is a CO (Central Office) device while ALL126AS3 is a CPE (Customer Premise Equipment) device.
The ALLNET ALL126AS3 will allow operators worldwide to compete with cable and satellite operators by offering services such
as HDTV, VOD, videoconferencing, high speed Internet access and advanced voice services including VoIP, over a standard copper telephone cable.
ALLNET ALL126Ax series is seen by many operators as an ideal accompaniment to a FTTP rollout, where for instance fiber is
supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.
Product Features:
- VDSL2 standard for high data throughput
- Integrated 4-Port Ethernet 10/100Mbps Switch
- Two RJ11 ports for phone/line
- Integrated DSL-splitter and surge protection
- Flexible VDSL bandplan-profiles
- Automatic speed adjustment for VDSL2-Port
- Configuration via webbrowser and/or RS232C console port
- Energy saving, low power consumption (only about 6.7W)
- Advanced VDSL technology from Infineon® for up to 100 Mbps/symm.
- Diagnostic function for line quality
- Private point-to-point-operation or public DSL-provider-connection
- Connection via twisted 2-wire-phonecable
- Simultaneous telephony for analog or UK0 (ISDN) on the same wire
- Bracket for wall mounting
Technical Details:
Element
| Specification |
Chipsets: | Lantiq VRX |
Standards: | IEEE802.3/802.3u/802.3z standards ITU-T G992.1/G992.3/G992.5/G993.1/G997.1/G993.2 standards |
Interfaces: | 4x RJ-45 10/100/1000Mbps Ethernet port 1x RJ-11/Terminal Block connector for VDSL2 line port 1x RJ-11 connector for POTS/ISDN device
1x Console port (RS232C/115200bps) |
Band Profile: | 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a |
Band Plans: | 997, 998 |
Max. Bandwidth: | Symmetric 100 Mbps/300m |
LED indicators: | Power LED 4x Link/Active Status for Ethernet port Link LED for VDSL2 Port |
Switch method: | Store and forward |
Management and Features: | - supports ATM and PTM transmission mode auto detection(ADSL Annex B backward compatible) - supports ATM-TC,ATM and AAL5 (ATM Flow Throughput / OAM Cell Filter and Forwarding / AAL5 SAR:PVC / ATM Traffic Class / ATM PVC Shaping / ATM PVC Scheduling) - supports ATM Total Upstream Priority Queues - supports IPv4/IPv6 - supports Multicast IP table/IGMP v3 Proxy and Snooping - supports IEEE 802.1p VLAN Priority and mapping to DSCP - supports HTTP/HTTPS(SSL) web management - supports remote management and monitor - supports configuration backup and restore - supports 8 queue MFC/DSCP both type QoS - supports IEEE 802.1p VLAN Priority and mapping to DSCP - Provides surge protection for Line port |
Console port: | RS-232C/115200bps |
Flow control: | Full duplex: IEEE 802.3x Half duplex: Back pressure |
Power consumption: | 6.7W Input Voltage: 12 VDC |
Environment: | Temperature operating: 0°C ~ 50°C (32°F ~ 122°F) Temperature storage: -20°C ~ 70°C (-4°F ~ 150°F) Humidity: 10 to 90% (non-condensing) |
Dimensions: | Widht/Height/Depth: 183 x 36 x 145 mm Weight: 385g (without power supply) |
Mark: | CE |
Package contents: | - ALL126AS3 VDSL Slave Modem - 1 Power plug 12V/1A - 1 CD with manual (english) - 1 Patch cable LAN - 1 Patch cable phone (Western connector) |
Downloads
Back